shopping a friends monopoly. bottom outlane plastics are cracked. avail anywhere?
You're currently viewing posts by Pinsider billsfanmd.
Click here to go back to viewing the entire thread.
Quoted from PinDeLaPin:Don't know where my wife scored the bigger dice from but the new shooter rod comes from pinballlife.com for like $5. Since the marking on the dice for 1 was centered I just drilled the hole out a bit smaller than the shooter rod. Then I tapped in the rod with a rubber mallet and put a new set of springs on it and called it a day. Is a really easy uograde and lookd pretty damn good I think.
How do you get the handle off the Pin life shooter rod? Never mind they sell them that way
any idea where dice came from?
Quoted from Mancave:You can still buy the complete plastic set at a few places (Marco's and RTBB over here in Aus) I don't think there is anywhere that sells separate plastics apart from the usual slingshot plastics. I might have 2 spare lane guide plastics for this machine as i changed my complete set when i bought it, no idea what the condition is though, will have to look for them.
thx...after seeing some other broken plastics. We decided to just get the set.
Quoted from PinDeLaPin:So you need this https://www.pinballlife.com/knobless-shooter-rod.html
And u need this https://www.pinballlife.com/ball-shooter-plunger-barrel-spring-075-long.html
And u need this https://www.pinballlife.com/ball-shooter-plunger-inner-spring-purple.html
Hope this helps
any idea what size your dice are. most are 19mm which is about .7 inches. prob too small
Quoted from PinDeLaPin:Mine are 1.5" anything smaller imo would be too small.
thx. looking for larger ones
Quoted from Lamprey:Supposedly, the optimal size is 30mm with rounded corners (assuming you drill into the corner and not a flat side). Depending on the color you want, you might be able to find that. I wanted transparent red and I wasn't able to find that in 30mm. The closest I could find was 25mm from Aliexpress. I just received them a couple of weeks ago, but I was out of the country. Gunna try drilling this weekend and see how it works out.
let me know how drilling on corner goes. prob much better then flat side
Quoted from Lamprey:Just getting caught up on posts.. I made one for myself and just had it printed at Staples on adhesive material. I can post a full size image someplace if you are interested in getting one made. Otherwise there are places that sell a decal.
Here is a sample:[quoted image]
i would love a pdf file!
Quoted from Lamprey:Assuming MediaFire doesn't mess it up:
http://www.mediafire.com/file/8yxvbyldlf5782q/Backboard.tif/file
Very cool...what size should it be? What was the cost to print on adhesive? Thx
Looking to see if I can upgrade/replace 2 parts of my friends monopoly....The plastic sign on the main ramp has the clear front cracked and the bank door is a little rough. I am guessing this is normal. I have plastic set but not clear front or a river tool.
8C226CBE-D86F-4076-AB47-2FB5459CC255 (resized).jpeg
Quoted from gunstarhero:That "Relight jackpot" sign had been "repaired" before. That clear front and the screws aren't original.
Thx. I have new plastics. Looks like I need a rivet tool
How is sign mounted to ramp ?
Quoted from pacman11:I am looking for a new plastic because mine is cracked. Anyone have a Free Parking plastic in good shape they want to sell? PM me details. Also need a new sticker on the bank door.
I wish stern made extra decals like the bank sticker to purchase individual as mine is a beat up too. Think you have to get the whole decal set.
Quoted from wiggy07:I scanned in the Bank decal and posted it on my site. You can print the bank door picture onto a piece of adhesive.
http://www.pinballsupernova.com/images/repair/Bank%20Door%20Sticker%20resize.jpg
http://www.pinballsupernova.com/pinball%20repair.html
awesome. Any idea the dimensions? I wonder how a regular adhesive print from like Staples will hold up?
You're currently viewing posts by Pinsider billsfanmd.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/monopoly-club-own-it-all?tu=billsfanmd and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.