My family love this game.
I m using comet's LED in my monopoly.
http://www.cometpinball.com/product-p/2led.htm
My machine needs a new "yellow Bank" decal, but I cannot find it any where
Does anyone know where can I find it?

Yes. I was looking for the BANK decal. Now i know i can buy them from Pinballlife.com Thank u.

Thank you

To Philly
Not a shop job, but I think u should add this service bulletin #133 into your to do list (if you haven't done it yet).
http://www.sternpinball.com/service-bulletins/service-bulletin-133-monopoly

To Sliverunicorn
I think I m OK right now. Thank u.

To Wiggy07
Thank you for the pic. I like your site. Super cool.

_{Post edited by Pinrookie}

When SPECIAL is lit, I always thought it will give me some kinds of special award like extra ball/ bouns point, if my ball drained via an outlane. But so far after over 60+ games it is not happening... I wonder why? And can someone tell me how to solve this bug? Thank u

Hi n49th,

Yes I m running 3.03 in my machine.

1. Are you getting a "That's pretty special" message on the DMD after the ball goes down a lit Special outlane?

Yes.. I got this fancy message on my DMD.

2. Are you on Free Play or Tournament mode? If so, you may only get the message/animation in #1.
Otherwise, see if you are awarded a credit.
Also, home mode (Film Star reset) awards an extra ball for the special, by default. I believe this can be changed in the adjustments menu.

I will double check and adjust my settings.

Thank You

_{Post edited by Pinrookie}

Hi phillyArcade,
I was having the same problem a few months ago. After I disassembled the whole upper right flipper then I realised something wrong with my coil stop bracket (spi part # 515-6308-01). The problem was the flipper plunger (when activate) could not made a contact with coil stopper. I think it had less than 1mm gap between them, so I replaced the coil stop bracker, problem solved. Back to your case, I think you may need a new flipper plunger (spi part # 515-6304-01) or new coil stop bracket.

Lower right flipper .JPG
Upper right flipper .JPG

Yes, I think so, since u replaced a new coil stopper for your bottom right flipper, I think u can swap both coil stoppers like lower coil stopper to upper coil stopper and see what is the outcome first. Just make sure you got the correct part.

I bought all my LED from comet pinball LED.

I strongly recommended you use Sunlight white and green for all your GI.

Twin 2835 SMD 6.3V AC/DC INTENSE BRIGHTNESS with CLEAR or FROSTED LENS
- Frosted - #44/#47 Bayonet - Sunlight White x 30

Twin 2835 SMD 6.3V AC/DC INTENSE BRIGHTNESS with CLEAR or FROSTED LENS
- Frosted - #44/#47 Bayonet - Green x 6

image.jpg