Before I buy any more tools that will just set in the bin. I thought I would ask for what works the best for you guys. I'm in the middle of bring back a hyperball to have it as a shop game. I need to replace about every pin on the playfield connections. So any suggestions towards a good all-around extractor set would be much appreciated. The pic is the first connector I have to tackle.

Thanks Troy

20140714_182034.jpg

#2 9 years ago

GIR

girloveswaffles

Pinside member

Norwalk, CA

11y 116K 8,149

Those are AMP pins. and as far as removers, there is no "One" tool to remove them. There are at least three for molex pins (.063, .084, and .093 diameters), and at leas one that handles two different sizes. You can purchase them thru Amazon.com:

http://www.amazon.com/s/ref=nb_sb_noss_1

I'm not sure how many types of amp extractors there are.

#3 9 years ago

ESK

sixpakmopar

Pinside member

Holland, MI

11y 45,400 612 4

I have the red colored Molex #11-03-0002 rev. D for .062 pins and it works great, I have a cheapie .093 extractor which works ok but not a smoothly as the higher quality Molex one. I assume it would work just as well for your pins too which appear to be .062

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!

This page was printed from https://pinside.com/pinball/forum/topic/molex-pin-removing-tools and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.