An old stale thread, but I am attempting a mod today.
After looking at several of the mods, I like the look of the 'flag pole' mod by kungfucop. But I am concerned that it will stick up above the lowered table. This would make it impossible to lower the table all of the way down. Is that important?
Also, the table as sized would put the entire weight of the pin in the rather flimsy center of the bottom of the box. I have visions of the bottom ripping free and jamming up through the pin. How important is it to put some sort of support so that the lift occurs on the side of the pin box? I see several have made wood attachments to the lift table.