Houston, TX
I must say, this is an entertaining thread. Much like a wreck on the side of the highway, it's hard not to look - even if it's a bit morbid at times.
(Topic ID: 318168)
You're currently viewing posts by Pinsider SunKing.
Click here to go back to viewing the entire thread.
This topic is closed.
1 month later
1 month later
Quoted from greatwichjohn:My wife looks after my needs, no need to jack off at the shop. ... While Avi is at the shop I will refrain from the porn movies during my meal breaks
Can we all agree we've officially crossed into 'TMI' territory here?
3 months ago:
Quoted from greatwichjohn:I will not be talking about rules until sometime in the Fall. Same as no sense getting the programmer involved until the whitewood is finished testing.
36 days ago:
Quoted from blueberryjohnson:Good to see you're willing to change the plan. Revised timeline for flipping whitewood? Safe to assume Nov 1 is out the window.
Quoted from greatwichjohn:You never know since I have not had a beer in 3 days. Might be flipping balls around with my fingers tonight, when I get back to drinking.
Quoted from greatwichjohn:No flipping playfield until November.
26 days ago:
Quoted from greatwichjohn:Had a local regular in, & he had a good laugh that the whitewood playfield will be flipping & tested by the end of this month. That is still the plan, & I will be spending my time getting it done.
14 days ago:
Quoted from greatwichjohn:It might be weeks before I get this flipping.
12 days ago:
Quoted from greatwichjohn:Try to meet the end of month deadline for a flipping pin.
8 days ago:
Quoted from greatwichjohn:You forgot who is building this, & it will be lucky to be flipping in days if not weeks.
2 days ago:
Quoted from greatwichjohn:Hope to have a flipping whitewood this week.
19 hours ago:
Quoted from greatwichjohn:Did one wire today
John, I wish you the best and admire your tenacity, but you're digging your own hole here. Not sure if I should keep 'adding fuel to the fire', but I found a bunch more when searching 'whitewood' vs 'flipping whitewood'.
3 months ago:
Quoted from greatwichjohn:I will spend this week getting the parts needed to get get a whitewood going for September 1
Quoted from greatwichjohn:No sense going into anything until the whitewood is tested.
Quoted from greatwichjohn:Jon Norris, a wealth of information. Still going through the BOM list he did to make this build easier to do. To have the parts needed for a working whitewood in September.
Quoted from greatwichjohn:Wait until you see the whitewood next month.
Quoted from greatwichjohn:Back to the project that I can more than manage on my own, & direct the build. Jon Norris is not going to do a boat load of stuff more on this project. After I get the whitewood into testing to see what needs to be tweaked or added on that is it.
Quoted from greatwichjohn:I got some free paneling from a friend that I might use for whitewood testing.
Quoted from greatwichjohn:I spent some time cleaning up the workshop to be ready for September 1. Get ready to use my shit free paneling to test for the whitewood.
Quoted from greatwichjohn:I got to say Ben & the guys thinking the panel mdf is a joke for a whitewood test. That is what I plan to do, & think it will be ok.
86 days ago:
Quoted from greatwichjohn:No one is in a panic mode, & I should be starting the test whitewood later this week #3.
78 days ago:
Quoted from greatwichjohn:The real test plywood whitewood will be in October.
Quoted from greatwichjohn:There will be a fully working plywood whitewood tested before the end of October.
Quoted from greatwichjohn:Well the mdf panel I do not consider a true whitewood. The plywood one I will get done with a cnc in October.
69 days ago:
Quoted from greatwichjohn:Programmer will not start until November. The plan is to have a whitewood cut late October.
68 days ago:
Quoted from greatwichjohn:It should be a working whitewood before November 1.
46 days ago:
Quoted from greatwichjohn:Started on the plywood whitewood.
Quoted from homebrood:This is getting redundant. Enough of the judgement and criticism. Pointing out all the missed self-imposed deadlines.
What's getting redundant ARE the missed, self-imposed deadlines. ...and the off-color meats IMHO.
You're currently viewing posts by Pinsider SunKing.
Click here to go back to viewing the entire thread.
This topic is closed.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
