With plenty of room in the back box, what led to the decision to place boards under the PF? I think vibration could be an issue there. And thanks for doing this. MM is a great game.
You're currently viewing posts by Pinsider rc_like_the_cola.
Click here to go back to viewing the entire thread.
This topic is closed.
Quoted from gweempose:Rick, thanks for taking the time to answer some questions and address people's concerns! It is much appreciated. I don't know what stage you are at in the build process, but I think you should strongly consider color matching at least some of the inserts. I mentioned this in another thread, but I will repeat it here, since I know you are reading this one. At the very least, all red and green inserts should be color matched. It boosts the color saturation and makes them look so much better. Conversely, yellow inserts should NOT be color matched. A yellow LED beneath a yellow inserts ends up looking kind of drab. I happen to think yellow inserts look best with cool white LEDs, but some people prefer warm white. As far as white/clear inserts, I think cool white is definitely the way to go. It gives them a nice crisp, modern look.
Just my two cents.
I assume the reason for all warm white LEDs is to match the original as closely as possible.
Quoted from Silverballer:That was my first thought. I understand the desire to avoid shipping and all but....
Yup. Shipping will definitely be cheaper than taxes.
You're currently viewing posts by Pinsider rc_like_the_cola.
Click here to go back to viewing the entire thread.
This topic is closed.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/mmr-pps-and-overall-update-official-pps-oct-21-2013?tu=rc_like_the_cola and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.