To LP30

Try unplugging the micro /hdmi connector at both ends and try reseating. After reseating, check the display for proper alignment. If it doesn't work, unplug the small micro connector end only from the top of the beagle board. This is the black board with the very small connector at the top. Do this while the game is powered on. Then insert the micro connector end in slowly and keep checking for display alignment. If you try this ten or fifteen times you will find a sweet spot where the display aligns right. I had this same issue out of box. The micro connector is so small it seams to be failing. Mine did and I had to replace the board. While waiting for the board, I messed around with this a lot and got it to align when hitting the sweet spot. Email me if you are still having issues and I can explain further.

Thanks
Dougram69

To stangbat,

I had this same issue out of box. The small micro connector at the top of the beagle board failed on my game right out of box. The connector was flaky and I could only get the display to work after reseating the micro connector 15 to 20 times. Inserting it gently and slowly looking for the right spot for it to connect just right. Sometimes connection would hold for a day or so, then fail again with no data. The ultimate resolution is a new beagle board. Your support person should be a able to resolve.

Thanks
Dougram69