first i would test if the problem is the switch or the electronic
whats the message switch closed or only check switch ?
release the switch connector in test mode and see if you have a reaction
may be the switch must be bended a little bit
Quoted from Damien:
Am I seeing this right?
If you have a MMR Standard, the cost for the color upgrade chip is $399, but if you have the LE, it's $199???
yes you are right!
nice speaker mod
i will laser some Knight emblem for it
and will also install leds
at the picture is a decal in chrome
but this one looks better
its a lasered piece a friend did for me
switch is ok (you hear the sound)
VUK will NOT work
but at the search it will work
thats sounds like a software bug for me
i have done this for my MMR
its stainless steel laser cut
i have only 1 kit left the price is 40$ (2 pieces) shipping to USA would be 15$
yes you have to do it by your own
cut vinyl or laser it from stainless steel
just for your own machine
sad that there is no official part available
will get my MMR LE next week
have a lot of Mods here
mirror speakerpanel logos
chrome side rails
also some of this, if you are interested
Color Rom Bugs
Some friends told me that there are a lot of Bugs in the HD
sometimes it changes to MONO COLOR and LOW RES
should be Buggy
and no updates
Do You have 1 or 2 keyxs for the backbox
at my new MMR i have just 1 inside of the coindoor
Quoted from rooftop:
hi, every once and a while lately, when i power up my game, the draw bridge starts going crazy till i shut off the game and restart it, but then once its cycled it self and is ready to play the ball launch won't work, and i have to replace the 6.3 amp fuse in the lower power box, to make things function properly again then its fine till whenever, has anyone else had this issue?
sounds like exact like my problem
do you use the color chip?
I think it drohendste hier Long it Is
A Second LED flasher Couleur be installed without a Problem
sorry that was the correction on a german phone
i mean it should be no problem to ad a second flasher to an existing one
but when you connect a strip to 1 flasher may be the circuit is not dimensioned for this
Merlin hole to powerful
Sometimes the ball hits the right ramp and jumps back in the hole
looks like the kickoff has to much power and may be not good for the plastic ramp
any ideas how to adjust this case?
i got also the info that the upgrade for the big display will be ready in about 4 weeks
but i think the price will be about 1K
the price for the tft is already about 600$
it is a special stretched/cutted display from Korea
used for digital signage
i was in contact with them, its very expensive, and of course it looks great
so lets see what they will offer
Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside