I have a 2019 MMR SE and noticed the back pop bumper (Jet) RGB LED is out. Does anyone know if this is a bulb that can be "pulled" out like a #555 base? or a bayonette? Or is it hardwired? I see all three types of similar looking LEDs on Planetary Pinball's site. I tried pulling it out like a 555 but it was in there pretty good and didn't want to break anything. I noticed the 4 wires are soldered to a wiring block with other bumper leds that are working. Any suggestions or troubleshooting tips? I don't see this documented in my manual either. Thanks in advance!

20230201_233222 (resized).jpg

20230201_233254 (resized).jpg

Screenshot_20230203_160519_Samsung Internet (resized).jpg

Yes the SE and LE in the 2019 run has RGB in the pops, above the castle, in the speakers, and all around the playfield. This particular pop led has a clear star shaped lens and then there's a black plastic body that is screwed down in the pop. I tugged on it pretty hard and am not sure if it has a socket or not. Very hard to see, and I am not sure what I'm looking at. Has anyone ever removed one? What type is it? Is it like the pic I posted from planetary pinball, or is it 555 or bayonets?

Thank you!