You're currently viewing posts by Pinsider bkaelin.
Click here to go back to viewing the entire thread.
Quoted from LTG:There is an ethernet cable running along the side of the huge board below the playfield and plugs into the bottom of it. Please unplug it and plug it back in and push real tight.
LTG : )
Yes sir, I have tried that a number of times, on both ends of the cable. No change.
BTW, CR 10 is red on the board in the backbox, and CR 8 is flashing green. The other LEDs on the board are solid green.
Quoted from NeilMcRae:maybe try a different ethernet cable?
will any ethernet cable work?
Quoted from bkaelin:Yes sir, I have tried that a number of times, on both ends of the cable. No change.
BTW, CR 10 is red on the board in the backbox, and CR 8 is flashing green. The other LEDs on the board are solid green.
Which according to the manual sounds normal. CR 8 flashes green while booting.
There seems to be a lot of play at the connection point on both ends. Don't want to jack up the boards, but I did push them in pretty well....nothing.
Quoted from pintechev:It doesn't look like J5 is plugged in fully in the backboard. When you re-plugged it, did the connector click into the housing?
Marc
Hi Marc, yes the picture looks like it's not quite in all the way, but it is. I had removed the screw holding it in to make sure I was getting it in all the way.
Quoted from Concretehardt:Really good question! Bkaelin did your game come with the diffuser "fix" already installed? If not how do the inserts look, are they readable when lit?
My game inserts look awesome. no diffusers that I know of, but the print is dark/solid and looks great. My game was built December 27, 2016.
You're currently viewing posts by Pinsider bkaelin.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/mmr-owners-club-all-things-mmr-discussed?tu=bkaelin and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.