Quoted from SuperPinball:Can it be hooked up to V+ and V- ?
I have my topper (12v) hooked up using the V+ and V- and it works great.
(Topic ID: 128232)
Linked Games
Medieval Madness
Williams, 1997-
Medieval Madness (Remake - Classic Edition)
Chicago Gaming Co., 2019
-
Medieval Madness (Remake - LE)
Chicago Gaming Co., 2015
-
Medieval Madness (Remake - Royal Edition)
Chicago Gaming Co., 2019
-
Medieval Madness (Remake - Special Edition)
Chicago Gaming Co., 2019
-
Medieval Madness (Remake - Standard)
Chicago Gaming Co., 2015
Topic Gallery
You're currently viewing posts by Pinsider Only_Pinball.
Click here to go back to viewing the entire thread.
Quoted from hoby1:My MMR was made by CGC and has melamine
I have MMR #1645 that was built by CGC and it also has a melamine cab
JMR
2 months later
Quoted from mrgregb123:Hey guys, just a heads up that Ball Baron is doing a two day special for MMR owners.
Get 20 Ninja pinballs, the shiniest ball on the planet, for $25 (normally $39).
1. Add 20 Ninja balls to your cart:
https://ballbaron.com/product/ninja-super-shiny-chrome-pinball-g10/
2. Apply coupon code "mmrmadness" at checkout. Enjoy!Offer expires Tues 3/6/18.
Thanks a bunch for posting this. Order in!
Quoted from FlippyD:That's pretty impressive! What power level are you flippers set at?
-3
1 month later
Quoted from Riffbear:What exactly triggers the castle to collapse?
It needs to trip the opto and then the switch in the moat. Lock is just switch.
Quoted from Riffbear:Ok thanks. I just worked it out.. Its the switch in the moat. Mines not centred properly and sometimes the ball passes to the left of it and misses the switch!
Tried to adjust it to no availThat too is the reason why I sometimes don't get ball locks when hitting through the left wall.
No problem. I have this happen every once in awhile but not very often. Open a ticket with CGC for help, Lloyd and Arturo are awesome and they will get you squared away in no time.
Quoted from Riffbear:I did and Lloyd said to adjust the switch..
Have written him back letting him know its not working.
Since that did not help he will probably escalate issue to engineering. You will then most likely hear from Arturo next. I have had a few issues that have all been solved quickly.
Quoted from Riffbear:All good! I just fixed it!
AWESOME! Now go play the crap out of it!
1 week later
Quoted from LTG:They are working on an upgrade kit for this.
Any idea on what this will cost?
Quoted from Pimp77:No way that’s $1k! If it is they will sell less than 10.
I agree that $1k is nuts. What would everyone be willing to spend on this? I'd go $500
Quoted from Pimp77:No where close to $500 for me. You can get a pretty sweet tv for 500 bones
VERY good point.
1 month later
Quoted from Pinzap:Love it!! Let me know when you have them for sale...
Me too! This is AWESOME! I would love to have one.
2 weeks later
Quoted from Goalie:It has arrived! Xmas in July
Enjoy! Looks like they have made at least 240 games since I got mine in late Oct.
1 month later
Quoted from KozMckPinball:If the springs were broken it would be repeatable the next day I think.
On mine one of the flippers did this but not all the time. Turned out it was a broken spring. Guess not as easy in this case.
1 week later
Quoted from white1ce:I adjusted the posts and settings as recommended and it is much better. Thanks! And don't worry, I did it with the power off.
You may also want to increase your ball save timer while you get the hang of it.
2 weeks later
Quoted from Goalie:Can anyone tell me what the part number is for this metal post? Mine snapped off last night, and I don't see it in the manual
I had the exact same post snap. What I did was this, I took the broken part to Lowe's and used the template to find the thread pitch. Then I found some threaded rod with same pitch. The smallest one they have was about 1/4" longer so I just screwed it into the T nut so the extra part sticks out under PF. Sorry I don't remember the size but I was able to find what I needed in 5 min and was back playing. Hope this helps!
1 week later
Quoted from Kkuoppamaki:I've seen the same issue with sometimes the castle blowing up when shooting the castle multiball gate but I believe it might be a SW bug (also in the original I believe) but could be wrong
It's not a bug. If you trip the bridge/gate opto and then quickly shoot the lock the game thinks you went into castle.
2 weeks later
Quoted from KozMckPinball:Trolls going down and up during ball search counts as Troll hits.
Yesterday when playing with my son the ball got stuck behind the right troll. Game went into search and the trolls didn't register a hit when they popped down and back up. My guess is your switch contacts need adjusting.
Quoted from MrSanRamon:LE for LE, Standard for CE or some other combo? That might make a difference in the decision.
It's a little different on MMr as the difference between the standard and LE is just a shaker motor and trim color choice. You can add a shaker for $150. Both needed the color upgrade.
As far as trading a MMr for a MBr, I wouldn't do it. MBr is a great game but not nearly as good as MMr in my book.
Quoted from MrSanRamon:He gave no indication of what was being traded...a standard routed MMr without color with 10,000 plays for a MBrLE or was it a MMRLE with color chip and 30 plays for a MBr CE.
It makes a difference and that's what I was drilling down to.
Robert
Very good points.
3 weeks later
Quoted from pencilneck:Wife and I picked up MMR at the Grand Ole Gameroom in Nashville last weekend. It has been on our wishlist for 3 years now.
Enjoy your game. Definitely upgrade to color! Well worth the $400!
1 month later
2 weeks later
Quoted from sirlonzelot:I have cold white in it and spotlights, makes a big difference
Any chance you have before and after pics you can post?
Thanks!
Quoted from sirlonzelot:I found some on my iPhone, hope it helps
Thanks for posting these looks great. Much brighter. What bulbs did you use?
2 weeks later
Quoted from Pinball_Eddie:Is it normal to have a blue box in the top right corner that shows 60hz and the resolution on the display?
Definitely not normal. Mine only shows that for a few seconds when it's booting up.
Quoted from Pinball_Eddie:Now just gotta get that blue info box off there and I’ll be golden.
Have you opened a ticket with CGC?
Quoted from Pinball_Eddie:Ticket opened today, here’s hoping
Let us know what they say. It sounds like there's some kind of issue with the sync or vid circuit that feeds the LCD. I'm sure CGC will get you fixed up.
1 week later
Quoted from New_England:wanted to make a ticket for my MMr. I’ve noticed that sometimes my multiball lock will show “lock lit” after I’ve already gotten to ball 1.
Is this on the first multiball?
Quoted from New_England:It’s happening with the first multiball for sure. Seems to be happening for the second as well
Very strange and something I have not had happen on my machine.
Quoted from New_England:took the glass off and looked into it more.
Multiball 1: doesn’t require lock lit. Only needs three hits to achieve multiball.
Multiball 2+: lock required after each ball hit. (Ball lock+ball 1, ball lock+ball 2, ball lock+multi ball.)
Correct. Thats why I was asking if it happened on first multiball too.
Quoted from New_England:Is that normal?
Yes. That's how mine is. It's also that way on my AFMr SE. On MB #2 I have to light lock, lock ball and then light lock again.
2 months later
Quoted from jarozi:I believe the LE differences are:
- Trim color choices; Black, Gold or Stainless
- Shaker
- LE plate w/ number
- $200 discount on color chip
That's correct. In addition the Stern built ones didn't have the melamine sides. The CGC ones do.
4 weeks later
Quoted from paynemic:I have a friend that solved that. He tuned the voices for me. Much better. He even submitted it to PPS but got no response. But it’s awesome on my machine.
How?
Quoted from gliebig:I know, but there's a setting you can adjust how many times is needed.
Heads up. When changing this it will still say you need to collect 8 on display.
Quoted from Rarehero:They've always been that way. All the castle bosses are too low. Rick/CGC knows this but won't release an official update for it for some reason.
Maybe we will get one when the next batch is built. Seems like this would be an easy fix. Fingers crossed.
1 month later
Quoted from gunstarhero:I wish they’d go through and revise the MMR color code, there are a few other errors it it, like the way Merlin’s Magic has text that gets cut off.
Me too! Would be nice if they also revisit the audio levels.
2 months later
Quoted from dharris2112:Yeah. That looks the way I'm leaning.
The color upgrade for $200 is a must buy!
Quoted from rai:I am on the fence and this is the main feature that would decide for me.
You know you want the game! You have been going back and forth and are still here. Get the game and don't look back.
1 month later
Quoted from whitey:The last 3 remakes are incredible games that just got better !
Agreed. I have all three and love them. If I had to pick one it would be MMr. Hands down.
2 weeks later
1 week later
Quoted from KingPinGames:Once they are available you can buy them from any authorized cgc dealer.
Any idea on when that will be?
Quoted from bicyclenut:Whats the deal with the Red Trolls? Are those just custom or were they in the original Williams games?
Custom.
2 weeks later
Quoted from f3honda4me:MMr SE arrives tomorrow and I’m so excited.
Welcome to the club!
Quoted from iloveplywood:I'm officially jealous!
Me too! Come on CGC sell us the upgrade kits!
Quoted from f3honda4me:Dumb question. Is there a way to make the speech louder without affecting the music volume?
I was hoping this was going to be addressed in the new update. The speech really needs to be boosted.
Quoted from LTG:Contact your distributor to order now.
I should have put... Come on GCG SHIP us the upgrade kits! 
Quoted from f3honda4me:Topper ordered, I think I need a shaker too now.
The shaker in MMr great. Add for sure!
2 months later
Quoted from LTG:I'd do that. Move it upstairs when you can do so safely.
Agreed! Set that bad boy up and post some pics!
Quoted from YZRider926:Congrats and please get some pics. Mine was delayed at least a day. Hopefully I’ll get mine tomorrow.
We want pics of yours too!
Quoted from Doctor6:Cointaker says they have the "special edition"... is this the version they have or something else?
The royals have a topper and custom powder coat on armor, coin door, legs and speaker panel.
3 weeks later
I think I'd try something like a nail file board. Should be able to knock that down safety. I'd be afraid that a dremel would get away from me and damage something.
1 week later
Quoted from jarozi:Question about the lock shot, how does the game compute a hit? Very very rarely a ball goes in there that doesn't register.
I get this rarely also. It seems the ball hops over switch without registering.
1 week later
Quoted from jarozi:Software version 3.0.0 has been posted, no beta tag this time. Confirmed it fixes the custom logo issue for me.
https://www.chicago-gaming.com/coinop/medieval-madness/update
V3.0.0 RELEASE NOTES
This version includes the following enhancements and bug fixes:
1) Added support for King of Payne Topper.
2) Added support for XL Display.
3) Added support for RGB LI LEDs.
4) Fixed bug preventing custom logo installation.
Who's going to be the first to try to move an XL display from a MBr or AFMr?
Quoted from SantaEatsCheese:If true I hope they make older versions of software available. I'd like to make the color chip work.
The color chip will work with the older software. The new software will be needed to upgrade display, GI and to add the topper.
1 week later
Quoted from NeilMcRae:So the MMR to widescreen, LED and topper upgrade kits landed in the UK this week mine will be with me on Tuesday and I’ll be streaming the upgrade process on twitch.
Awesome. Hopefully this means we will be getting them soon.
Quoted from Lame33:The most unexpected thing is how long it takes to boot. First time I turned it on, I thought it was dead.
They do take a bit to boot. Well worth the wait. Enjoy your new game!
Quoted from gunstarhero:Glad to see y'all getting yours tho.
It's just the lucky guys in the UK getting the kits as they were shipped over in a container with machines. They haven't started shipping USA orders yet. Hopefully soon!
Quoted from Inferno:Finally! Definitely worth the wait. Royally stoked
Looks great.
Quoted from MrMikeman:... I may swap the one from my JPLE just to see if it's worth getting one.
If you do, please post before and after pics if possible.
Thanks!
Quoted from MrMikeman:Challenge accepted. Back in a few with some pics!
Awesome! Been thinking about ordering some. Looking forward to your report.
Quoted from MrMikeman:Not sure what the black metal plate is for.
It is to cover the plug
Quoted from NeilMcRae:one thing about the screen update.
The sound improvement against the original MMR is staggering, wasn't expecting that but glad to hear it!
This is great to hear. Was hoping this would be the case!
3 months later
Lit Frames has Brian Allen's alt translites that are signed for $99 shipped. I grabbed one tonight. Only a few left.
https://www.litframes.com/product/signed-medieval-madness-alternate-translite-brian-allen/
Quoted from Westsiderkg:Can you show us real photos of it installed???
I will post pictures when I get it.
1 week later
Quoted from Westsiderkg:Can you show us real photos of it installed???
Here you go.
IMG_20201025_1325486 (resized).jpg 3 weeks later
3 weeks later
Quoted from seah2os:At startup, when Ye Old Medieval Madness comes up on the screen, it’s in a “Smoothing” format. But all the other screens, plus the scenes during game play, are in a “Dots” format. Is it possible to change all the scenes to Smoothing? Thanks!
No
2 weeks later
Quoted from TimBoch:When did they stop putting the screw hole in? Never understood why it was there since it holds just fine with the screw thats there.
They came out a few weeks ago. Looks like they still sell both.
1 week later
2 weeks later
Quoted from brian-allen:Hi everyone - I'm creating these Side Blades for Medieval Madness with my hand-drawn artwork
These are CRAZY COOL! I have your MM translite and LOVE it. Looks like I am going to need these too!
Quoted from MasterTinkerer:I’m joining the club! Working out the shipping details now.
Welcome!
2 weeks later
Quoted from gunstarhero:Not accurate, cause I have a Stern build and it’s plywood (LE 453).
Like I said originally the nicer cabs were only LE but they ended up going to everyone.
hmmm. Maybe it was the non LE that didnt get the plywood bottom?
Quoted from Jon9508:Got my barrel spot lights switched over to rgb bulbs
That looks awesome! Nice job.
3 weeks later
Quoted from Norcal:whats happening guys I have picked up a MMR LE and upgraded to the XL Screen, wow what a difference.. Question is, Cn the older MMr Le screen be used in any other games? Is there any value to the original screen, speaker panel etc? thank you for any feedback.
The only value in the old display is if someone with a classic MMr, AFMr or MBr has one that goes out.
Totally agree on upgrade! It does make a huge difference. Super glad I did it.
As everyone else has said, 12k is crazy. CGC will make more at some point I'm guessing. They way underestimated demain on the last run. Hopefully they won't make that mistake twice.
2 weeks later
Quoted from Jon9508:Yes the boards are included with the kits.
They come with topper and RGB light kit. Not needed for the XL display
1 week later
Quoted from Mrsiyufy:Just got a 2015 LE and I’m getting a lot of bounce over and rejects from the Merlin hole are there any adjustments or tweaks to help it capture the ball?
Bend the bracket behind saucer down a bit. Doesn't last long. Made out of way to thin metal stock. i am going to be replacing mine with this https://mantispinball.com/product/medieval-madness-merlin-scoop/
Quoted from Mrsiyufy:Main issues were -
subwoofer screws are too short
I ran into this issue as well and still need to get longer ones. What size did you use?
2 weeks later
4 weeks later
Quoted from ralphs007:I'm really hoping that CGC does another run of the Medieval Madness Royal edition .
The Royal editions are done. If they do more it will be classic and specials.
1 month later
The problem is the bracket is made out of way too thin of metal. You can see this by bending it down slightly and shot is now good for a few games till it bends back. The best solution is to buy the Mantis assembly. It's made from stainless and won't bend like the factory one.
Quoted from Pinkitten:Having so much fun adding mods
Get the XL display! It's beyond awesome.
Quoted from Mrsiyufy:The RGB lighting is great too and a pretty fun install. I also did red led troll eyes.
I regret not doing this when I had the chance. Now the kits are sold out. Apparently CGC won't be making anymore.
Quoted from Mrsiyufy:Hopefully when they do another run of games they will do a few more kits too
That would be great. Definitely a snooze you lose situation for me. Was on the fence way too long.
Quoted from Jedi_Gill:How hard was it to install the Mantis assembly? and can you report if that fixed the ball from bouncing out of the Merlin hole entirely or around what percentage.. Also are you using any pads to soften the hit or just straight metal from the Mantis piece..
Thanks in advance for this info.
I actually only have second hand knowledge on this from reading pinside and RGP and people having great success with this part. I have been meaning to do this for a while. Just kept forgetting. Seeing this come up again reminded me to order the part and I did just that.
I will update here when I get it installed.
Stay tuned!
1 month later
Quoted from paynemic:Anyone know if the 2023 run will of se will have the rgb upgrade included? Or do I need to do it myself? I’d pay to have them upgrade it.
Yes. The SE's have the RGB lighting
1 week later
Quoted from pinmatic:I have a CGC MMR LE and I'm looking to upgrade some things on it. The only upgrades I have done is add all cliffy protectors. What do you guys recommend for upgrades?
The CGC XL display is a must have.
3 months later
Quoted from matt68061:Anyone know of anywhere with the RGB kits in stock? Yes…I Googled and all the normal hits are sold out… never hurts to ask…
Thanks in advance for any leads. Happy Holidays.
They have been unavailable for awhile now. Good news is CGC has said they plan more MM kits at some point. I am kicking myself for only getting the XL screen. Plan on getting the RGB and Topper on the next go around.
1 week later
Quoted from Richard-NBA-SF2:The shaker on my MMr seems to vibrate the cab in a not so enjoyable way (I have it set on ‘light’).
I have the exact same shaker in my MBr and AFMr and it feels perfect on ‘default’.
Any tips how to calm the shaker down a bit more? I already have the glass nice and snug with felt tape.
Thanks!
Richard
I have the same issue. I finally gave up and unplugged it.
Quoted from Richard-NBA-SF2:Maybe a anti vibration pad under it? A thin one. Then keep layering it until the desired effect is achieved…
Would like to know if anyone tried something like this first.
Thats a great idea. Following...
Quoted from Richard-NBA-SF2:I ordered that thin anti vibration mat. I’ll let you know how I make out!
Thanks!
Quoted from Dpirhana:I bought the Classic Edition in 2018, and added the shaker just after that. The shaker was always very mild. Then last year I upgraded the software when I installed the XL display. And the shaker was on steroids after that, even on the lowest setting. And it seems they tweaked the software because the shaker also activated during additional events.
Curious to know if anyone else had the same experience.
Yes, mine is the same way after the update. It has been mentioned before in this thread.
Quoted from Richard-NBA-SF2:I believe they said they will be making more. I can’t remember if it is 2022 or 2023.
Correct. I dont think they mentioned at date.
1 month later
Quoted from gambit3113:That range is right in my experience. I’ve been cold-call solicited here more times on my MMRE than all other machines I’ve owned collectively in the previous 13 years on Pinside. And all were willing to pay high into that range if I’d sell.
Same. but for me, MMr is the only game I have got PM's asking to sell. Have gotten a few over the past couple of years.
Quoted from sizzler747:I would bet they ask $10,000 for the SE.
I think you are right on the money with this prediction.
3 weeks later
Demand is significantly more then 300 units. Hopefully they will build more to satisfy all who want one.
Quoted from sizzler747:The demand for that machine is always high. They sell out immediately. They don't seem to care so much on making enough for everyone. They could easily keep making all of the titles constantly and have no problem selling them. I wonder if PPS or Bally/Williams tells them they can only make so many?
It's a head scratcher for sure. I'm sure dealers lists far exceed the 300 machines.
Quoted from Oneangrymo:Man this thing is a pain in the butt to get off
I used a fairly large pry bar and got VERY lucky. I do however need to find longer screws as the ones I got dont bite enough.
Quoted from benime:Screws for mounting 8" subwoofer are not long enough; kit includes 3/4" but I had to use 1".
This is very helpful info! Thanks for posting
Quoted from Richard-NBA-SF2:Me? I do not. The XL dmd/sound upgrade was done before I bought it.
Thats's the original sub
Quoted from Richard-NBA-SF2:but since taking the old one out is such a pain I may not try!
You *MAY* get lucky like I did and it pops out in a few chunks.
Quoted from Richard-NBA-SF2:Could I buy that somewhere?
I would try contacting CGC and see if they can sell you just the sub. Explain that you got yours from another collector and he didnt use the sub. Email them a pic of your *AWESOME* CGC themed gameroom for good measure!
Quoted from Richard-NBA-SF2:Haha, I just found it on Amazon (Canadian Dollars).
Might just buy there now? I see no reason why not? It is the same sub I believe?
It looks the same but you will still need the wood block part.
Quoted from Richard-NBA-SF2:There is none left right now I do not believe. I got mine in May 2021. Was the last one in stock from my distributor.
They are making more in 2023 I believe!
This is correct on both counts.
1 month later
Quoted from Calfdemon:Any rumor on when this run might take place?
Some time next year
Quoted from Richard-NBA-SF2:Ohh, I assumed they would all be SE versions.
I have heard its going to be only SE too. As a matter of fact, I have heard the classic is done for good and wont be an option on future remakes, just like Cactus
1 month later
I had a troll weld snap. I just replaced the entire assembly. Was super easy. Planetary sells the part.
Edit: I just checked and it's out of stock.
Part is:
Troll Carriage Assy A-21744
Quoted from duggum:The parts have been ordered and hopefully the repair will be relatively painless.
Did you find the full assembly?
2 weeks later
Quoted from Pinkitten:Mine doesn’t have the screw on the left into the playfield. Great mod/protector.
Mantis came out with the one without the screw a few years ago as the screw wasnt needed.
Quoted from northvibe:stock is pretty much out where I've looked
I too have searched for a topper and light kit with no luck. Kicking myself for not getting both when I ordered my XL display.
1 month later
Quoted from brandonx76:Hey all..
I'm interested in a CG Remake MM acquirement...
I understand CG is planning a 2023 production run. Does anyone have any info on this? (Price, downpayment, delivery ETA?)
Probably early in the discussion, but thought I would get ahead if possible with information on sell/sale/reserve details. Prepping to sell my Ghostbuster Premium (a HUO with great mods) to make room.
Thanks
Get on a list at a dealer ASAP.
Quoted from brandonx76:hmmm? Thoughts / Suggestions / Next Steps?
Seems many dealers are taking list of people interested. Can't hurt to call around.
1 week later
Quoted from KING-HENRY:color dmd added, which is confusing because I thought they all had color dmd’s as remakes. I wish there was a faqs page for all 6! Versions.
They do all have color LCD screens. You had to buy a chip to unlock the color and high rez dots.
1 month later
Ryan from CGC said they will have more kits when the next batch of MMr are made. Who knows when is will actually be. I am still kicking myself for only getting XL screen.
1 month later
Quoted from ToddSonOfOdin:Anyone on the lookout for a Royal edition topper upgrade for their machine? I just bought a LE with the Royal mods, not a topper guy, and I need to help pay the bill.
PM sent
4 weeks later
1 month later
I just installed a CPR mirrored backglass in my game. Looks AWESOME. Highly recommend.
https://classicplayfields.com/shop/pinball-backglasses/mmglass/
Quoted from jyeakley:Can you shoot a pic with the machine on? Looks cool!
pasted_image (resized).jpeg 1 month later
1 month later
Quoted from northvibe:xl displays are just so awesome and spoil us
I totally agree. I hope that when CGC makes future original games that they will use this screen format (Pulp Fiction made sense with the alphanumeric). I much prefer the dot art and animations VS the video assets we get now on new pins.
4 months later
Quoted from Devinsupertramp:is there a tip to fix it without causing myself more issues?
Check the coil sleeve
2 months later
Quoted from Faust:Hello MMR owners!
I’ve been busy making a fully interactive apron for MM:
-individidually lighted castle towers
-lightning blades
-front side light blades
-I made interactive troll lighting (bottom side lighting).
-Currently: black semi gloss. Will be silver sparkle maybe.I’m currently making 1 for me, but I may make this into a mod if there’s is sufficient interest, I can make a separate thread.
PM or post here your thoughts
This is AWESOME! Please post a video. I'd be interested if you make these.
1 month later
Quoted from WillM:The display appears to be upgraded to the HDXL (?) See pic of the MM logo at startup.
Thats the standard display. Do you have color in game play? If so then you have the color chip installed. The original run of MMr didnt have color changing LED.
2 weeks later
Yeah. For sure. It's so crazy how much money they are leaving on the table by not getting this stuff out. So many have moved on to new games at this point. What surprises me the most is the XL display. You would think with CCr still on the line they would have a bunch of these.
1 week later
Quoted from GCS2000:Thanks.
Just order the channels for the game itself or do I need bigger ones as suggested above?
Mine was super tight but I was able to use the factory channels that were on my MMr. The mirrored BG is awesome!
2 weeks later
Quoted from Sorokyl:hey guys.. how much extra amperage do you think the GI circuit can handle?
It's really easy to tap right off the power supply.
Quoted from Sorokyl:Is the gi always on when the game is on? No interaction with game?
Thats a good question. I never really paid attention.
Quoted from vikeking27:Just bumping this one up a bit to see if anyone has tips - adding a photo. Tried a few different things since posting but can't get it to stay aligned.
Are the welds on the carriage popped? Mine broke and when it started it looked like this and then they fully gave out.
1 week later
Quoted from haveaniceswim:Unable to find any problems with the wiring, I ordered a new coil. The new coil has diodes, the original coil does not. Is it OK to install the new coil as is?
Cut the diodes out.
2 weeks later
Quoted from Mrsiyufy:Here is the first test I did. This is a regular Amber led and not the flickering.
Very cool! Would love to see a video of the flickering version installed in your machine.
Quoted from Mrsiyufy:I did LED’s in the castle towers as well.
Please include that too!
1 week later
Quoted from Jamesays:ROM MEDIEVAL MADNESS -CPU PROFANITY
Has anyone tried this Rom I see listed in the marketplace
Remakes dont use the OG sound Roms
2 weeks later
Quoted from Sorokyl:edit, or use the opportunity to change to a mirrored backglass: (use the original translite somewhere else at home or sell online...)
I second this. The mirrored backglass is amazing in the game!
Quoted from CurtisC:especially when next to others...
I keep my Sprayway in the same spot.
Promoted items from Pinside Marketplace and Pinside Shops!
Traverse City, MI
Saint John, NB
You're currently viewing posts by Pinsider Only_Pinball.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
