Color changing castle mod. Non destructive and only cost $3 and 20 minutes

Here is mine with cool white. Much better. I also turned the Backbox light all the way down for less glare.

Picture doesn't do the cool whites justice.

20161030_221402 (resized).jpg

Yes all comet 2 SMD frosted. The clear didn't light the Play field up quite enough and you could see the lines on the plastics from the LEDs. I tried it first with clears but then changed them all back to frosted.

Here is my thread documenting the life of my Mmr on route. Monthly updates.

https://pinside.com/pinball/forum/topic/documenting-the-entire-life-of-a-medieval-madness-remake

You have to take off most of the castle and if you are good enough you won't have to take off the left ramp. Just take a bunch of pictures and go for it!

No

Mine is holding up nicely!

20170226_122212 (resized).jpg

$399 for a chip is ridiculous. I understand the cost is in the labor but color dmd sells the hardware and software for the same price.

Not to mention I already spent $8,000 with your company........

Mmr on Route is kicking ass. Only been there 1 year

20180107_115210 (resized).jpg