Quoted from bent98:rit dye looks like its for fabrics.
People have used it on flippers in the past. I don't know what colors or how successful it was.
LTG : )
Quoted from bent98:rit dye looks like its for fabrics.
People have used it on flippers in the past. I don't know what colors or how successful it was.
LTG : )
Last night for the first time I got to Battle for the Kingdom and drained. During the game I got to the video mode twice, which was a first for me. This morning after my 4th game I finally won....didn't realize they give u $50M for winning Ended up with 328M....didn't see the video mode once during that game. I did however earn 4 extra balls...two for blowing up castles (mine is set at 4 castles and I went through it twice), and two more for completing Royal Madness twice.
I swear I got the video mode qualified yesterday, but it was during one of the multiballs and once multiball finished I couldn’t see how to start it.
Quoted from cooked71:I swear I got the video mode qualified yesterday, but it was during one of the multiballs and once multiball finished I couldn’t see how to start it.
Merlin hole.
Quoted from Kiwipinhead:Merlin hole.
Yep...I honestly didn't know one existed until yesterday, and when it started I had no idea what the heck I was doing....although today for the first time I noticed that it was an option in Merlins Magic, but it never seems to get selected.
Yesterday I also got the video mode for the first time ever. Didn’t know it existed. I think you just have to move the farmer from side to side to stab the falcons.
Quoted from Pin-Pilot:Arriving tomorrow is my XL display and sound upgrade. A little pricey but a nice addition for sure.
Quoted from PtownPin:Last night for the first time I got to Battle for the Kingdom and drained. During the game I got to the video mode twice, which was a first for me. This morning after my 4th game I finally won....didn't realize they give u $50M for winning Ended up with 328M....didn't see the video mode once during that game. I did however earn 4 extra balls...two for blowing up castles (mine is set at 4 castles and I went through it twice), and two more for completing Royal Madness twice.
Quoted from Reefkeep:what setting is it that shows your initials and high scores?
In the manual page 1-51. A.4 01 set to on.
LTG : )
Quoted from Reefkeep:That’s great, make a video! Who did you order it from?
Ordered it through PPS last week. They posted in the MMR thread they had a few ready to ship. I had been thinking about ordering one but did not want to wait a month for it to be shipped.
Quoted from Kiwipinhead:Merlin hole.
So Merlins Magic is just lit as normal and it selects the video mode?
Quoted from cooked71:So Merlins Magic is just lit as normal and it selects the video mode?
Yes, but its random. Its not always an option.
Quoted from cooked71:So Merlins Magic is just lit as normal and it selects the video mode?
regarding Video Mode:
Video Mode is lit by (default) 8 completions of FIRE (on the inlanes and outlanes), and started in Merlin's Saucer or randomly selected by Merlin´s Saucer.
The video mode is called "Save the Children", and you must save 3 children from being captured by a large flock of buzzards (or some other evil bird). Kill 30, and you win. If one child is taken, you lose. The mode plays a lot like Defender, with the buzzards trying to carry the babies off the top of the dot display. You receive 100K for each buzzard killed, and a 1M bonus for completion.
There is a secret weapon available in the Video Mode. (never seen, maybe to be activated via launch button)
Quoted from Cayenne:Video Mode is lit by (default) 8 completions of FIRE (on the inlanes and outlanes), and started in Merlin's Saucer or randomly selected by Merlin´s Saucer.
One the same ball? Or in total? I know FIRE resets on the next ball, but do the FIRE completions carry over?
Quoted from Cayenne:regarding Video Mode:
Video Mode is lit by (default) 8 completions of FIRE (on the inlanes and outlanes), and started in Merlin's Saucer or randomly selected by Merlin´s Saucer.
The video mode is called "Save the Children", and you must save 3 children from being captured by a large flock of buzzards (or some other evil bird). Kill 30, and you win. If one child is taken, you lose. The mode plays a lot like Defender, with the buzzards trying to carry the babies off the top of the dot display. You receive 100K for each buzzard killed, and a 1M bonus for completion.
There is a secret weapon available in the Video Mode. (never seen, maybe to be activated via launch button)
Hmmm....I've never seen or heard of a secret weapon.....I've been in this mode 4 times and have never beat it....although the first 2 times I had no idea what I was doing.
Quoted from PtownPin:Hmmm....I've never seen or heard of a secret weapon.....I've been in this mode 4 times and have never beat it....although the first 2 times I had no idea what I was doing.
It is tricky to beat. You have to think ahead of the birds. I have finished it once. Usually get to about 20 then a kid is taken... As for the secret weapon? Never heard of it until now.
Completing 8 fires in the game. Not in 1 ball. Merlin’s magic has to be lit in order to start the video mode.
As for the secret weapon. The launch button kills all the birds that are on the screen. You only get one “bomb”. If a bird catches a child and u cant kill it hit the launch button before the bird goes off the screen.
With a lot of people not knowing about the video mode I wonder how many have never started barnyard madness......
Quoted from JMK:On our MM Royal, when my son got 5 cows on the catapult mode, and then began the video mode (from the Merlin scoop), he started ‘Save the Calves’ video mode.
This was a different video mode than Save the Children.
Can’t recall this being on my original MM.
How do you start Barnyard Madness?
Save the calves is an easter egg. Same as save the children but with calves and moo sounds.
Catapult all 5 different items and the catapult will flash for Barnyard Madness.
Yes, Barnyard madness is very amusing. Lots of great sounds but very difficult to get to Barnyard Madness.
Quoted from LTG:People have used it on flippers in the past. I don't know what colors or how successful it was.
LTG : )
What would you recommend for possibly grinding off the Williams logo? I have a small dremel but not sure what tip can be used for fine control.
I don’t know about obscure, but here’s what I have seen:
Castle (main) Multiball
Multiball Madness (stackable multiballs for all the ramps, lanes. Trolls and catapult)
Barnyard (catapult) Multiball
Trolls!
Whack a Troll
Save the Children video mode (also a hidden cow version)
Royal Madness
Battle for the Kingdom
Quoted from bent98:What would you recommend for possibly grinding off the Williams logo? I have a small dremel but not sure what tip can be used for fine control.
Dremel would be too hot.
I'd lay a flat piece of sand paper down and sand it off by hand. Keep using finer grits so you leave a smooth surface.
LTG : )
Quoted from JMK:On our MM Royal, when my son got 5 cows on the catapult mode, and then began the video mode (from the Merlin scoop), he started ‘Save the Calves’ video mode.
This was a different video mode than Save the Children.
Can’t recall this being on my original MM.
How do you start Barnyard Madness?
Hmmm....thats a new one...never seen that mode so if u get 5 cows, chickens, skulls, etc...it gives u an option for a new video mode or is it just cows? Getting 5 of anything is a serious challenge.
I believe it was just for cows that it applies; and he unlocked Save the Calves video mode. He indicated he got 5 cows (I know that sounds high) before he started the video mode. It’s possible you only need 3 cows? Maybe somebody else can chime in on this.
Quoted from bent98:What would you recommend for possibly grinding off the Williams logo? I have a small dremel but not sure what tip can be used for fine control.
You can buy new plain ones from Pinball Life for a couple of bucks each. Keep the Williams logo ones for spares.
rd
more or less all rules, goals and infos of MM/MMR are here: http://pinball.org/rules/medievalmadness.html
Barnyard Madness looks maxing with the RGB lighting on the Royal. It was rather amazing. Just wish it was a bit easier to achieve. There will be a next time.
Quoted from rotordave:You can buy new plain ones from Pinball Life for a couple of bucks each. Keep the Williams logo ones for spares.
rd
I need purple. As mentioned, PBL doesnt come in purple.
Quoted from bent98:I need purple. As mentioned, PBL doesnt come in purple.
I think he meant to buy the plain ones to dye and save the logo ones.
LTG : )
I got the new topper today...it looks nice ... unfortunately the only thing in the box was the topper and templates....I had to put in a ticket CGC to hopefully get the balance of the hardware to install it.
Quoted from LTG:I think he meant to buy the plain ones to dye and save the logo ones.
LTG : )
Yes.
rd
Quoted from Djsandoz:How do you know if it’s updating? How long it takes for new update I’m just getting a black screen
Try another microsd card.
Quoted from chrisnack:Got my custom logo installed last night...much better than the CGC logo
[quoted image]
What kind of SD Card did you use? Was is FAT32 formatted? No matter what SD card I use, my MMr says it is unable to mount the card. I've even used the same card that worked for my MBr. I am running the latest firmware version. Thanks to anyone who can share the special trick for successfully loading a custom logo.
I'm sure this has been asked and answered but I'll ask again. When I upgrade my MMRLE to the new code will it erase my high scores and the number of total game plays?
Quoted from PtownPin:I'm sure this has been asked and answered but I'll ask again. When I upgrade my MMRLE to the new code will it erase my high scores and the number of total game plays?
Shouldn't. Mine didn't.
LTG : )
Quoted from SkaterVet:What kind of SD Card did you use? Was is FAT32 formatted? No matter what SD card I use, my MMr says it is unable to mount the card. I've even used the same card that worked for my MBr. I am running the latest firmware version. Thanks to anyone who can share the special trick for successfully loading a custom logo.
Custom Logo update: I continued to try the same FAT32 formatted SD card multiple times in a row. On my 6th or 7th try, my MMr finally mounted the card and allowed me to load a custom logo. So, if you're having issues, keep trying. It also may help to sweet talk the machine while you're trying
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/mmr-owners-club-all-things-mmr-discussed/page/150 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.