Following up on my upgrade installation experience. Last weekend I did the topper upgrade and screen upgrade. Last night I tackled the RGB upgrade (I actually installed the new back LED strip the night before, which was incredibly easy). The manual is very helpful. I would especially recommend referring heavily to the back page of the manual to unsure you are putting the new LEDs in the correct order for each string of lights (back page shows the placement of the connector and the order the lights should be installed). That was super helpful and made the string install a breeze (I've done numerous incandescent to LED conversions, so I've had plenty of experience with GI replacement). My biggest annoyance with the entire process for all three upgrades was the pop-bumper lighting. After you cut the wires and needed to splice it together with the harness, the existing wires were so short and barely reached each other. Getting all 4 wires into the wire connector was a real pain. I needed to add a length of wire to one of the grey wires. I was swearing a lot, hehe. In the end, it wasn't horrible, but the pop bumper lighting took me way longer than I would have liked. I would estimate that the RGB upgrade took me about 3 hours.
If anyone has any questions about the upgrade process I would be happy to help (if I can). Thanks!