can't wait, my favorite pin going to look even better
You're currently viewing posts by Pinsider Oneangrymo.
Click here to go back to viewing the entire thread.
Quoted from Vimtoman:Just want to point out to all that my Motion tracker mod is nowhere near $400
Deleted
Quoted from Vimtoman:Thats because you had both the bezel and the Motion tracker plus wanted full value placed on the delivery.
Oh yes I forgot about the bezel, thanks .
Quoted from delt31:Tracker is awesome but I'll get it with the apron. How much for bezel?
There was some confusion with me because I thought the “display bezel” was part of the tracker mod . I didn’t realize it was for the airlock and therefore a separate mod . Contact Andrew for the price. I think he gives discount for both
Quoted from dgpinball:I was confused also, thought you needed both. Unfortunately can't swing the tracker mod right now, I think it's brilliant.
Yes exactly ! I advised him to call it airlock bezel
Quoted from MK6PIN:Good to know. Alot of pm activity and work behind the scenes......can't wait to show some of this!!!!!
how much longer? I'm anxious to see it.
Quoted from skyknight320:Perfect! This gives me more time to sell the buy to my wife.
I got rid of mine. Moved into a bigger house so I can get more pins.
Thanks Alien Apron!
Quoted from Oneangrymo:I got rid of mine. Moved into a bigger house so I can get more pins.
Thanks Alien Apron!
Never mind wife wants it to work , so no more big house and No more
Pins moving back home.
Sigh ..
Can someone show me a picture of the screw meant to be used under the playfield for the first ladder brace? Thanks
Quoted from Averell:Installed my Apron and did all the wiring beneath the playfield.
[quoted image]
[quoted image]
[quoted image]
[quoted image]
Next step is to prepare a wooden panel for the strobe controller in the cabinet and a different solution for the strobe switch.
[quoted image]
[quoted image]
[quoted image]
Awesome wiring why do u have to find another place for the trigger switch ? I had to bend the bracket just a bit to get it in the middle
916DA8B9-8101-41D1-BB52-3F85190DB8DE (resized).jpeghey guys I initially put the wires on the wrong power source, and luckily u guys caught it, can u confirm does this look right? I had to stuff them in there because there were already a lot of wires there. One says V+ the other says V-. I put the red one V+ the black one V-
Thanks
Quoted from MK6PIN:Bingo... you're good. As a rule, the mod uses red for +12v and black for -12v. wire colors. Heighway liked solid yellow for +12v, and black for -12v. Ignore the shrink colors at the connectors themselves, just look at the wire.
I used a few different connector types to make it nearly impossible to plug things in the wrong way ( mainly multipin molex).
Fully operational! Works great! Only thing left is to get the apron on fixed good and put that flasher in the hole right. Awesome job man
Not a hard install at all!
Quoted from MK6PIN:Excellent!! Yea, pretty straightforward, just have to take your time....misspoke above...Heighway was frisky w the yellow...yellow w black stripe is 12v positive, solid yellow is 70v positive, yellow w green stripe = ground.
See my power distro for the game
[quoted image]
Is that the capacitor mod next to the power supply ?
Quoted from Oneangrymo:Finally got around to doing my tracker mod. It looks awesome, but this is the only screen it shows regardless of the ball in the shooter lane etc. Anyone have any ideas what I did wrong? [quoted image]
Never mind had wrong connections at shooter switch .. all good now .
Can u the color of the apron be changed or is locked on blue ?
Quoted from Indypin:Mark knows I love his apron and the work he put into it. Very happy with the apron, as well as your mod. I checked everything on the tracker, but I’ll send you a pic as requested.
Make sure the wire colors match the instruction manual. I didnt swap them initially thus my problems.
You're currently viewing posts by Pinsider Oneangrymo.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/mk6pin-s-alien-apron-adventure?tu=Oneangrymo and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.