You're currently viewing posts by Pinsider shanetastic.
Click here to go back to viewing the entire thread.
Quoted from RobT:You have a mirror blade on the backboard too?!
Dang right! Well, not a mirror blade, but it is a custom cut piece of mirrored acrylic. It was something like $12. I can't remember the website I ordered it from, but there are probably several sites out there that could cut one to size.
Quoted from drshaw:I have the bolt out but how do I get the housing out from the inside of the cab? It's stuck in the hole from the inside...
Hmmm... there shouldn't be anything holding on to the housing now, unless the hole in the cabinet is a little tight. You should be able to get it out. Try screwing the bolt back in slightly and tap on it until it starts to pop out.
You're currently viewing posts by Pinsider shanetastic.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/mirror-blades-install-video-b_r?tu=shanetastic and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.