He's giving a 9AM presentation at Expo this year...that would be a good time to ask him in person.
You're currently viewing posts by Pinsider JodyG.
Click here to go back to viewing the entire thread.
I ran into the no dimples thing on my Motordome swap. The T-nut holes were drilled, so I used a pair of pencils shoved into at least two of those holes as locating points, as the tapered pencil will tear the paper and locate the hole perfectly. I left the two pencils installed and then I did a rubbing with pencil lead to transfer all the holes onto paper so I could see where they were. Then I shoved a sharp pencil into the center of each screw hole, poking through the paper again. Then I moved the paper over to the new playfield, Insert two pencils into the "key" holes, and predrill the holes into the playfield using the screw holes in the paper you previously made. Worked awesome for me, and didn't really slow me down much.
Quoted from radium:Three words ….
Class
Action
Lawsuit
Have fun doing that with a German company from the USA.
The old clear coats with methylethylbadshit in them are still available. Saying the EPA banned them is urban legend. But you also can't blame the operator for not wanting to be around them knowing what we know today if there are other options.
Quoted from Kobaja:How do we feel about putting up a "go fund me" or similar to make this happen?
Lets discuss this. Unfortunately I am not in the US to lead this, but may there is a different way.
Please also: I hope no individual will sprint ahead and post a "go fund me" until we are clear how we want to do this. That would not help, but do the opposite.
Good luck suing someone in another country. People need to just stop buying them. He is still going to come to expo, and people are still going to not confront him, and he knows it.
You're currently viewing posts by Pinsider JodyG.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/mirco-playfields-warning-for-potential-buyers?tu=JodyG and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.