You're currently viewing posts by Pinsider Nokoro.
Click here to go back to viewing the entire thread.
Quoted from Jmckune:Is it possible for a microswitch to be bad if I can hear it clicking correctly? One of my ball trough switches isn’t registering but I can hear it clicking and have verified all wires are connected properl
Connect a multi meter to each of the lugs. See if there is continuity when the switch is closed and no continuity when it is open.
Quoted from Jmckune:OL when open. Readings only went to 00.1 when closed. One next to it went much higher so I assume the switch is bad internally?
So infinite resistance when open and very little resistance when closed? That’s as expected.
Did you look for broken or missing wires on other switches in the same row or column on the switch matrix? That would be the next thing to check.
I really think the next step is checking the wires on the other switches in the same row or column on the matrix.
You're currently viewing posts by Pinsider Nokoro.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/microswitch-question-1?tu=Nokoro and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
