I have a switch issue I just can't seem to solve. The switch test is fine for all switches, but during gameplay the top target of the #3 Bank does not register. It is the only switch that does not. The other kicker is that when it is down / switch is closed it knocks out another column of switches on the matrix. If you manually open the switch by lifting the target up, they all start working again.
Any ideas on this one?
Quoted from AWKnewstubb:I have a switch issue I just can't seem to solve. The switch test is fine for all switches, but during gameplay the top target of the #3 Bank does not register. It is the only switch that does not. The other kicker is that when it is down / switch is closed it knocks out another column of switches on the matrix. If you manually open the switch by lifting the target up, they all start working again.
Any ideas on this one?
check the diode on that switch..it could be bad,faulty.
Quoted from AWKnewstubb:I changed the diode, unfortunately it did not solve the issue.
is the wiring on that switch soldered on in the correct order?
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/meteor-switch-issue?hl=awknewstubb and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Auckland
Detroit, MI