If you end up putting in all new drop targets I'd be interested in some of your old ones. I could use the old style M for sure and wouldn't mind spares for the others. Then I'd only need to find an E to make a matched set.
You're currently viewing posts by Pinsider Robotworkshop.
Click here to go back to viewing the entire thread.
If you end up putting in all new drop targets I'd be interested in some of your old ones. I could use the old style M for sure and wouldn't mind spares for the others. Then I'd only need to find an E to make a matched set.
It looks like Titan makes different colored post caps. I am going to try some on an Elektra and may end up using them on Meteor too:
https://www.titanpinball.com/image/cache/catalog/Silicone%20Rings/Post%20Caps-800x800.jpg
https://www.titanpinball.com/index.php?route=product/product&path=33&product_id=52
Quoted from Pinball_Nate:I remember someone else having trouble with the "ambient light" from the coin slot bulbs, so I plan to make cardboard sleeves to fit over the sockets to keep the light forwards.
[quoted image][quoted image][quoted image]
That would be me. The ambient light from the coin door was bugging me so I designed some covers and made them in ABS. I'm on the third revision and am happy with the way these turned out. They keep the light shining through the coin door and fixed the issue. I would only use LED's in the coin door with these since a regular bulb would get too hot. You can see a picture of how they look installed. The light sockets hold the covers in place. I have extra sets available. Just send me a PM if you need a set.
Stern_Coin_Door_Light_Covers (resized).jpgYou're currently viewing posts by Pinsider Robotworkshop.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/meteor-restoration-1?tu=Robotworkshop and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.