I recently couldn't get 43volts to MPU. I installed new rectifier board and new MPU as the old had damage. Game boots but I only get 5 chimes on boot. Also if I add a credit and hit start it won't kick ball out. Left flipper works but not both right flippers. The drop targets dont reset. And it seems it constantly is adding points. Should I revisit connectors? I'm very new to pinball repair.
1) check all fuses (as mentioned above, the one under the playfield is the most likely culprit)
2) check all wires. There could be a short with a bent wire or two touching.
3) check for cold or cracked solder joints.
Thanks pinball gurus!! Fuse directly under the play field did the trick. Game resets and functions as it should... Mostly. I still have the issue of both right flippers not working. The right flipper button actually is working the ball feed solenoid in the very bottom under the apron.
Quoted from Ricorad:Thanks pinball gurus!! Fuse directly under the play field did the trick. Game resets and functions as it should... Mostly. I still have the issue of both right flippers not working. The right flipper button actually is working the ball feed solenoid in the very bottom under the apron.
Go through the checklist i gave above. It may get you to 100%
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/meteor-help-1 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Chesterfield, VA