Quoted from CUJO:What's the equivalent SE9302 transistor used for Q13 on the Driver Board?
TIP102
You're currently viewing posts by Pinsider superchicken.
Click here to go back to viewing the entire thread.
Quoted from CUJO:What's the equivalent SE9302 transistor used for Q13 on the Driver Board?
TIP102
Does it work in solenoid test? Did you also replace the diode (1N4004). I always replace them together. I'm guessing what ever blew out the transistor the first time took it out again. Or if it works in test, the switches on the drop target bank need to be cleaned with some non-coated card stock and adjusted.
Quoted from CUJO:Are you saying the 1N4004 on the driver board or on the solenoid under the playfield?
I always swap the 1N4004 on the board when I do the TIP102, but a bad diode on the coil could be the root cause.
You're currently viewing posts by Pinsider superchicken.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/meteor-drop-bank-wont-reset?tu=superchicken and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.