I built, compiled, and installed my setup using the Rev 3 board with Robertsonics Wav Trigger and recommended SD card. It works, but no background sound. I hear the Match music, but no music during game play, just the switch triggers and mode callouts. Any ideas? I have the USE...1p3 defined in my code and recompiled/downloaded several times. Diag code 14 (music) can be set to 1,2,3 or 99. I tried them all. The documentation mentioned the possibility of 4 or 5 also if using the Wav Trigger. Was that implemented? I bought the Wav board neelw about a month ago, so I figured it was 1.30 or later FW. Thanks!

Appreciate the wisdom! I may go ahead and get the programming cable.

Updating the firmware fixed the issue. Thanks again!