Metallica rubber sizes. Help please.

By FiveSixPyro

4 years ago


  • 15 posts
  • 5 Pinsiders participating
  • Latest reply 3 years ago by callmesteam
  • Topic is favorited by 3 Pinsiders


Search this topic for posts matching certain words or written by a specific Pinsider. Or both!

Linked Games

#1 4 years ago

I've had some time to enjoy my Metallica Pro factory except for LED's. Before I get more black crud than I have to does anyone know the sizes of these 3 rubbers. Yes I can take them off, I tried searching but there's too many posts.

Sizes needed:
-Rubber by mystery
-tiny rubber by rollover
-rubber by bumper

I assume the posts are 3/16 and 3/8. Correct me if I'm wrong please. TY!

#2 4 years ago

Please? I can't find the PDF manual online and the sizes aren't stamped on all the rubbers. So taking them off might be pointless. Bumping just in case this passed everyone by. I did post it early on a Sunday.

#3 4 years ago

#4 4 years ago

I changed all mine to white day after I opened it. I have them in a pile still. Keep meaning to make a rubber ring list for the pro owners.

I will try and figure it out for you when I have some free time at home.

#5 4 years ago


Hope that helps.


#6 4 years ago

Thanks, Jim!

#7 4 years ago

I will get the complete list to you soon Don, I swear!

#8 4 years ago
Quoted from Whridlsoncestood:

I will get the complete list to you soon Don, I swear!

haha... I stocked up so I should have whatever it takes on hand. Just was wondering how much I'd need or oddball sizes, but you mentioned that there wasn't a ton of rubber on it anyway. Thanks!

#9 4 years ago

They are rock stars. All rock stars use small rubbers

#10 4 years ago

I have them here in front of me.

2 qty - 2" - slingshots
1 qty - 1" - above right outlane
1 qty - 3/4" - Under the right ramp
1 qty - 7/16" - near upper right lanes
2 qty - 5/16"
10 qty - 3/16" is what they used, I used 7/32"
10 qty - 3/8"

That's it. I'd say removing the right ramp is absolutely necessary, but its not a big deal. Whole thing took maybe 30 minutes.

#11 4 years ago

Thanks guys! I hope this thread is useful for others trying to filter through 100's of Metallica posts. Let me just make sure the tags will help. Just upgraded to flipper fidelity speakers. Not too loud, just way more balance. Music is more dynamic and adds a nice thump. I have it set on high you can lower the sub 4db's if you want less thump. Happy with the purchase. Yes the speakers aren't spectacular but the crossover board and completely compatible wiring harness make it a no brainer if you plan on keeping the game a while. Especially a music themed game.

Edit: are the rubbers the same sizes and quanties for LE and premium editions?

#12 4 years ago

I would guess so on the Premium... There are a couple behind the captive ball, but I think they are there for the benefit of the pops/Sparky, so I'm guessing they are on both games.

#13 4 years ago

Missed a 3/16"! Edited my original list. 10 total.

10 months later
#14 3 years ago

How does Met look with white rubbers? I'm tempted to go the same route.
Paul. Editor,

#15 3 years ago

I put white in mine, I love it. Never really noticed it after swapping it, so its 'inoffensive' enough.

Promoted items from the Pinside Marketplace
$ 299.00
Lighting - Interactive
From: $ 35.00
Lighting - Interactive
Professor Pinball
$ 70.00
Playfield - Toys/Add-ons
ModFather Pinball Mods
Machine - For Sale
Brighton, MI
$ 69.99
Playfield - Toys/Add-ons
Lighted Pinball Mods
$ 48.00
Playfield - Toys/Add-ons
$ 229.99
From: $ 35.00
Lighting - Interactive
Professor Pinball
From: $ 42.00
Cabinet - Shooter Rods
ModFather Pinball Mods
From: $ 217.00
4,500 (OBO)
Sale Pending!
Clayton, NC
$ 20.00
Playfield - Toys/Add-ons
ModFather Pinball Mods
$ 69.99
Playfield - Toys/Add-ons
Lighted Pinball Mods
$ 92.00
$ 24.99
Playfield - Toys/Add-ons
Bent Mods
$ 9.95
Playfield - Toys/Add-ons
$ 69.99
Playfield - Toys/Add-ons
Lighted Pinball Mods
$ 63.00
$ 299.00
Cabinet - Armor And Blades
PinGraffix Pinside Shop
$ 12.00
Playfield - Protection
Pin Mods
$ 129.00
Cabinet - Other
PinGraffix Pinside Shop
$ 48.00
Cabinet - Other
ModFather Pinball Mods
Hey modders!
Your shop name here


Note: This is an old thread. The last post was made to it 1,420 days ago. Resurrecting old threads is not necessarily a bad thing, if you think the topic is still relevant and/or your post is beneficial to it (e.g. following up on something). In other cases, it might be better to create a new topic.

Wanna join the discussion? Sign up for a Pinside account, or log in if you already have an account.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside