(Topic ID: 195257)

Metallica Pro/LE graveyard mod


By pingod

2 years ago



Topic Stats

  • 21 posts
  • 6 Pinsiders participating
  • Latest reply 2 years ago by spinny-vinny
  • Topic is favorited by 4 Pinsiders

You

Linked Games

Topic Gallery

There have been 12 images uploaded to this topic. (View topic image gallery).

AAEAAQAAAAAAAAhZAAAAJGUyODY5YjQ4LWEzNWQtNDkwZS1hNzFjLTA0Yzk4NjUyY2M4MQ (resized).jpg
IMG_2002 (resized).JPG
IMG_2001 (resized).JPG
IMG_2011 (resized).JPG
IMG_0180 (resized).JPG
IMG_0177 (resized).JPG
IMG_0175 (resized).JPG
IMG_0174 (resized).JPG
IMG_0167 (resized).JPG
IMG_3114 (resized).JPG
IMG_3116 (resized).JPG
IMG_3115 (resized).JPG

#1 2 years ago

This looks pretty good,makes the cemetery a little nicer.
Custom made by Spinny-Vinny on pinside.
Also made a taller cross to,not shown in picture.
Available for all three models to

IMG_3115 (resized).JPG

IMG_3116 (resized).JPG

IMG_3114 (resized).JPG

#2 2 years ago

Looks great

#3 2 years ago

Here's a few more pics with the cross instead with the Pro. And this mod is compatible with the cemetery arch made by someone else.

IMG_0167 (resized).JPG

IMG_0174 (resized).JPG

IMG_0175 (resized).JPG

IMG_0177 (resized).JPG

#4 2 years ago

So what this going for?

#5 2 years ago

How do I buy!?

#6 2 years ago

Sorry guys I was in a bit of a rush this afternoon. They are $50 for the ground cover, $25 for the cross. That is Can. funds. I haven't had a chance to try the cross on the LE yet, but am fairly confident that it will fit.
Just PM me your email and I'll send you a pay pal request.
I'm also working on a Celtic version of the cross. I should be ready in a couple of days.

#7 2 years ago

Pm sent

1 week later
#8 2 years ago

I finally did up the Celtic cross

#9 2 years ago

IMG_0180 (resized).JPG

#10 2 years ago

Looks great as always.

#11 2 years ago

Just tried out the Celtic cross at a buddies house last night, he used a red flasher instead of the white. Looks so mean!!!

IMG_2011 (resized).JPG

IMG_2001 (resized).JPG

IMG_2002 (resized).JPG

#12 2 years ago

Any way to add "Cliff" to the celtic cross? Also can the cover be added with a plastic protector?

#13 2 years ago
Quoted from shovelhed:

Any way to add "Cliff" to the celtic cross? Also can the cover be added with a plastic protector?

I can play with the idea of adding "Cliff". If you already have a protector on, it will work fine. The cemetery plastic just sticks on the existing plastic.

#14 2 years ago

Mine has arrived love that all the skulls are hollow. Looks great just need time to install. Thanks Tim

#15 2 years ago
Quoted from Twilight1:

Mine has arrived love that all the skulls are hollow. Looks great just need time to install. Thanks Tim

By hollow do you mean the light shines thru the skulls ?? It dont appear to in the photo's.. I'm considering ordering one myself. also, who's Tim?!

#16 2 years ago
Quoted from Dee-Bow:

By hollow do you mean the light shines thru the skulls ?? It dont appear to in the photo's.. I'm considering ordering one myself. also, who's Tim?!

Yes it shines through,Twilight1 is Tim.

#17 2 years ago

I figured he might be !! Ya, this mod looks rad! Think I better message Vinny!

#18 2 years ago

AAEAAQAAAAAAAAhZAAAAJGUyODY5YjQ4LWEzNWQtNDkwZS1hNzFjLTA0Yzk4NjUyY2M4MQ (resized).jpg

#19 2 years ago

Ya it will shine through this is a great bang for your buck mod imo. Also Punctuation is not my style Ha ha I kinda just wing s#!t

#20 2 years ago

I did hollow out the skulls on the first 10 hoping the light would shine through, but there's not much light up there. So I stopped hollowing them.

#21 2 years ago

I forgot to mention last time that the Celtic cross DOES work on the LE!!! It is a little bit more work to swap them out but not to bad. On the LE the cross does not rise as high as the Pro. So you don't see the skulls that well. I also have to shave the faces off the skulls, because the get stuck going up and down. (I make them look like rocks, but you don't really see them anyway)

Promoted items from the Pinside Marketplace
$ 25.00
Cabinet - Other
Filament Printing
$ 35.00

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside