I like the lit chrome skull one, pm sent. Also, does the putty come with each one?
You're currently viewing posts by Pinsider mustangpaul.
Click here to go back to viewing the entire thread.
Quoted from Mike_M:Can you replace the led eyes with actual lasers of death?
Oh bad idea even if it could even be done. You wouldn't even be able to see the beams unless there was smoke or something under the glass.
Quoted from jkashani:Installed in minutes and what a great addition.
Good to hear, mines on it's way.
Strange, I have it hooked up to the first of the 3 ball lock lights and when that light is off my skull eyes are still lit.
Quoted from zene10:Paul, as noted in the directions, the clips can be placed on coffin lock lights 1, 2 or 3. This will keep them on 100% of the time when the associated coffin lock light is lit.
Mine came with no directions and when I hooked mine up to lock light 1 they stayed on even when the lock light was off. It's a no brainer to hook this mod up but I was just wondering why most everyone can hook theirs up that way and it works where as mine doesn't. Very strange.
Quoted from Mike_M:Does this match how yours are hooked up?
No I just spliced into the wires. I'll try that. Thanks
Quoted from zene10:To clarify, mod clips are hooked to the red coffin ball lock lights, the eyes in the skull will light whenever that particular ball lock light is lit. If the lock light is on, the eyes will stay lit.
I have it hooked up to the first ball lock light and even when that light is NOT on the skull lights ARE on. I'll hook it up to a flasher.
Quoted from Mike_M:Does this match how yours are hooked up?
I clipped them on like that and now it works. Thanks
You're currently viewing posts by Pinsider mustangpaul.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/metallica-pro-skull-and-eyeball-coffin-mods?tu=mustangpaul and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.