Metallica (Pro)
Stern, 2013On my pro - the first cross target is falling by itself randomly. I can trigger it by press either ramp switch or either orbit switch. Really weird. Read others were having issues but that was MB mode. This is just the front target. Anyone have this happen? I can lift the table and check out, then return and it's fine for a game or two but then it starts again.
Thanks
Specifically I had the same issue and it was because of the screw had loosened that holds the arm that connects to the coil plunger to reset the targets. You will notice they did not use a lock washer on it.
Mike
This happened to me a few times. I finally put the blue ( removable ) loc tite on the threads and it's been rock solid ever since.
Removable medium duty thread locker.
Loctite 37418 242 Blue Medium Strength Threadlocker Tube, 6-milliliter https://www.amazon.com/dp/B000FIXQXK/ref=cm_sw_r_cp_api_k24eybVKXKA7V
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/metallica-pro-first-cross-drop-target-question and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Pittsburgh, PA