Metallica (Premium)
Stern, 2013You're currently viewing posts by Pinsider Dkjimbo.
Click here to go back to viewing the entire thread.
I had the same problem on mine and it was the tension of the wire harnesss to the pcb in the lower middle of thenplayfied - because stern had it so tightly pulled one of the pins or multiple pins on the board were bending and creating bad contact. I cut the zip tie holding the wire harness for the gi and gave it some more slack and then reconnected it and it was never a problem again.
Quoted from TigerLaw:I'm hoping it's not this cause I won't have time to get a new part by Sunday. I'll look at it further tonight and report back though. Thanks gang.
its just any old CAT6 cable - you can buy a replacement cable anywhere, routing it is a bitch but at least it would be operational...im telling you, cut the zip tie, give that cable some more slack and reseat it...your problems may go away just that easily.
You're currently viewing posts by Pinsider Dkjimbo.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/metallica-premium-gi-flicker-problem?tu=Dkjimbo and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Matthews, NC