You're currently viewing posts by Pinsider litedpinballmods.
Click here to go back to viewing the entire thread.
Quoted from Pinballerchef:Will these fit on the original non LED PRO versions? It has a plain speaker.
That is a wood panel. Yes and no. This specific panel will not replace the wood panel, but we will be making a lighted panel to replace the wood panel. The wood panel should be available about 30 days after we get the metal panel done. A few games have both a metal and wood panel, such as this and Spiderman.
The graphics that we make will be very, very close to the original Stern graphics, and we will also make that design for the metal board. We will also probably make a flame graphic that would work on either board, and maybe one more design.
Also lighted speaker kits with any acrylics will fit on these boards. We are also playing around a little with the lights around the speakers,
We will have this one at Allentown, but this one is a bit rough. When we do production, the board will be smoother and a few other changes. We will be experimenting with the quality of the graphics will be updated in the next 30 days also.
We have one electronic part that the prototype will be in today, if that works fine, then we will be 95% there, just some tweaking. If our electronic part that comes in today works as design, it will give you a couple of options of when to turn on the lighted panel. You could have the panel turn on and off when the game does, or you could have the panel turn on and off from any light in the game, so if you wanted the panel to flash when sparky does, that should be possible. This is the goal, if everything works as we hope, a few variables in that.
For the last year we have received requests for a lot of Stern games, Lord of the Rings, Iron Man, Tron and others. We are planning on doing nearly all of the Stern games, then moving either to Data East or WPC 95 games. Hope to have most Stern done this year.
We have been working on these Stern panels on and off for a couple of years. We had a few problems we had issues over coming. These Stern panels will be built differently then the Bally/Williams panels that we are currently doing. Once we get these Stern panels going, we hope to do a slight upgrade to the Bally/Williams panels.
Dan
Metallica Lighted Magnetic Hinge Covers available in 2 versions, Metallica in green and Sparky in light blue:
0 4 sterns (resized).jpg0616181951_resized (resized).jpg0616181951a_resized (resized).jpg0616181952_resized (resized).jpg0616182117_resized (resized).jpg0616182117a_resized (resized).jpg0616182117b_resized (resized).jpgThese pictures are of Lighted Speaker Panels for both Stern metal and wood paneled speaker panels. The wood size is being held, you can tell the wood paneled because of the square speaker area.
We are making Lighted Speaker Panels for wood Stern DMD panels as well as metal Stern DMD panels. The artwork is custom made to closely match the original artwork. The lights are full color LED with remote. Original speaker and DMD as well as lighted speaker kits and ColorDMD will work on both panels. It's hard to photograph some colors, but here are a few examples. Either panel will be $199.99 with artwork attached, and all screws needed for original speaker and DMD as well as lighted speaker kits and ColorDMD.
We will start having some metal paneled DMD Lighted Speaker Panels on our website next week, the wood paneled DMD Lighted Speaker Panels will be the week after that. Lightedpinballmods.com VERY LIMITED SUPPLY.
Here is the installation video for a Lighted Speaker Panel for a Metal paneled game. We will have an installation video for a wood paneled DMD next week. Installation is similar, but slightly different. The installation video is on a The Walking Dead with aftermarket lighted speaker kits. These panels DO NOT come with lighted speaker kits.
Thanks
Dan
Metallica Lighted Speaker Panel with "Original Resemblance" Art Package has just arrived in our store!
Check these out in action here:
And pick one up here: https://pinside.com/pinball/market/shops/1032-lighted-pinball-mods/01938-metallica-lighted-speaker-panel-original-resemblance-art-p
Or through our website.
Stay tuned, more art packages coming soon!
Metallica_Pinball_Ultimate_Speaker_Panel_LED (resized).jpgYou're currently viewing posts by Pinsider litedpinballmods.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/metallica-owners-thread?tu=litedpinballmods and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.