Those with subs. You go into speaker-level or line-level inputs?
I found speaker-level too quiet...
You're currently viewing posts by Pinsider johnnyarcade.
Click here to go back to viewing the entire thread.
My shooter rod was occasionally hitting the auto plunger. Auto plunger had a lot of play in it (side to side). I opened it up a bit to give plunger more room.
Anyone install a Pin2DMD in their MET PRO? I got the pbm files from j_m_, but cannot get them working with Pin2DMD. Followed all directions from JM for firmware part and on pin2dmd (https://pin2dmd.com/pinball-browser/) for the PAL file...still can't get it to work.
Do I need a separate cable (GPIO or Serial) to get it to work (no extra connections on pin2dmd)? It may also be Pinball Browser is not running the macro properly, as it throws up hundreds of msgboxs about defining palette for non-full dmd fame. If anyone already has a patched BIN via pinball browser before it gave these errors... I could try that.
Any help is appreciated.
You're currently viewing posts by Pinsider johnnyarcade.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/metallica-owners-thread?tu=johnnyarcade and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.