Doing some bad ass powdercoat on my newly aquired Met premium. It changes color as the light hits it. If you guys are interested hit me up. I did that green posted above as well
You're currently viewing posts by Pinsider Robertstone0407.
Click here to go back to viewing the entire thread.
Doing some bad ass powdercoat on my newly aquired Met premium. It changes color as the light hits it. If you guys are interested hit me up. I did that green posted above as well
Quoted from finnflash:ebay.com link » Metallica Pinball Side Armor Rails Button Protectors Matching Hinge Set
300 hundy is too much
I was wondering if there is a magnet strength adjustment for the coffin lock on the premium. Ive been having issues lately with it inconsistently grabbing the ball for locks.
Quoted from zpinman370:Hi guys- just installed a shaker in my Met pro and finding that the only time it actually shakes is when you hit the captive ball for coffin lock or when you get a multi-ball. Is this normal? I have a shaker in my AC/DC and get a lot more action.
Go to settings and set shaker to maximum interaction
Quoted from northvibe:Who made the extended sparky protector? My pf was replaced and I forgot to swap it
Pinbits.com
Decided to powdercoat my wireform so that it looks like the snakes tail. It looks pretty good. Contact me if your interested
Quoted from yzfguy:Is that ramp painted green and yellow, or are lights shining on it?
Pinstadium light reflection on ramps
Quoted from Litedpinballmods:Metallica Lighted Magnetic Hinge Covers available in 2 versions, Metallica in green and Sparky in light blue:
https://pinside.com/pinball/market/shops/1032-lighted-pinball-mods/01713-metallica-lighted-magnetic-hinge-cover-green-limited-edition
https://pinside.com/pinball/market/shops/1032-lighted-pinball-mods/01714-metallica-sparky-lighted-magnetic-hinge-cover-light-blue
You should make lights for those of us with cut out side rails
So i got a Metallica premium and its become about a nightmare to lock a ball in the coffin lock. The magent just does not seem to be grabbing the ball and i dont remember it being this bad. I called stern and they advised me to replace the board under the play field. I did and yeah still a no go. I read out the coil and it reads 5ohms and checked connections obviously. I see a setting on the menu in msec but it doesnt seem to help. Anyone got advice. I roll the ball over the magnet and it seems to grab it fine. The magnet works its like its not sensing the ball
Even with a new board
Quoted from yzfguy:Is the ball rolling over it and not catching? It's not gonna pull it from the neighboring playfield, not sure if that's what you're expecting or if it really isnt grabbing?
If i hit the block directly and the magnet rolls over the switch it doesnt seem to connect it. When it hits i can watch it roll over and even push the magnet down a touch
Quoted from embryon:Have you recently installed a shaker motor?
Quoted from embryon:Have you recently installed a shaker motor?
Not recently but it seems more active as of late
Quoted from Dee-Bow:Long shot but could you balls de-magnitized? Have u changed them out recently ?
Yeah i switched them out just to check lol
Quoted from lpeters82:Crazy timing. I was just going to ask if people were still doing this. I have a Newton ball, but have never installed it. I will say I get most of my lock shots off of slow rollers anyway. Even with the block it's pretty hit and miss. Does anyone turn on the setting where the magnet energizes after the block is hit? I tried it awhile ago but that seemed to turn it on after every hit. I would prefer that setting to only kick in when the hammer is ready.
I just turned that setting on and gonna try it. Range is between 2000msec and 5000msec
Quoted from yzfguy:LOL. I really don't see any issues with ball lock. The ball doesn't land on the magnet and lock on every single time I hit the captive ball, but I really don't think it is supposed to be that consistent, is it?
Yeah i get by design it wont every time but since new code i feel its a giant pain in the ass to get the lock and makes it feel broken
Quoted from Dee-Bow:Yup..he is busy as an artist in a calgary studio (like painting and shit!) But still hit him up! I sent a new Metallica owner his way tonight for a custom Seattle Seahawk sparky!! Send him a PM !
I did for the snake tail and no response
You're currently viewing posts by Pinsider Robertstone0407.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/metallica-owners-thread?tu=Robertstone0407 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.