Metallica (Pro)
Stern, 2013You're currently viewing posts by Pinsider wiggy07.
Click here to go back to viewing the entire thread.
Quoted from shlockdoc:check the power connection under the playfield. I was replacing the newton and bumped it and it was doing that .
I had the same issue in mine, what ShlockDoc mentioned, re-seat the power connectors under the playfield that go to the boards in the back-box. That fixed my issue.
Quoted from Frankies:where are these connectors located?
the connectors I reseated were in the cabinet, near the speaker. 4-5 connectors? Big connectors that attach the playfield to the wiring in the backbox. If you are looking at the machine the connectors are to the left on the bottom of the cabinet right under where the drop down targets would be but in the bottom of the cabinet.
Quoted from Frankies:at my Metallica it was a broken cable. The tan - blue wire was broken on the way to the backbox.
Awesome, glad you figured it out.
You're currently viewing posts by Pinsider wiggy07.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/metallica-drop-target-issue?tu=wiggy07 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Monroe Township, NJ