Driver Number 51, 52, 53, 54 are not working. Looks like those coils are all tied to the 6 transistor driver board.
Funny thing is 55, and 56 are working.
So basically the loop up post and the snake jaw work but the coil for the inline drop targets, coffin magnet, hammer, etc. are not working.
Any idea where I could start.. I'm a little stumped. Hoping that the driver board didn't die on me... everything was cool yesterday.
Any advice is greatly appreciated, thanks.
Most likely you have a loose connector under the playfield, or a broken coil power wire under the playfield. If you dont see anything obvious, check and see if you are getting 50V to the coils that don't work.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/metallica-coil-issues?hl=ksuwildcatfan and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Topeka, KS