If it's responding to touch at all, sounds like you need to calibrate the touch screen.
You're currently viewing posts by Pinsider RobertWinter.
Click here to go back to viewing the entire thread.
How far off is the follow?
Does it move left/right when you move your finger left/right and up/down when you move your finger up/down? Just not exactly where your finger is?
If so, I found this hint -
"Sometimes on the older touchscreens you have to trick the game. Try on the calibration screen touching points away from the calibration marks. If you try enough you can sometimes figure out where to press on the screen to calibrate even though you aren't using the calibration points if this makes sense. Say if you use the calibration point and the game reads it as being further right than the mark you can press left of the calibration point to calibrate. Also make sure the touchscreen is clean especially around the frame. You may need to remove to cabinet cover to do it right."
You're currently viewing posts by Pinsider RobertWinter.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/megatouch-rx-touch-screen-problem?tu=RobertWinter and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.