If you have any questions about the Zipper mech, let me know. I rebuilt one for a Bally Fireball that was a total mess.
You're currently viewing posts by Pinsider Skidave.
Click here to go back to viewing the entire thread.
If you have any questions about the Zipper mech, let me know. I rebuilt one for a Bally Fireball that was a total mess.
Don't be afraid of the Zipper mech. I would suggest new nyliners and nylon washers between the flipper plates. They are always beat to hell and back. Steve should have the small nyliners and I sourced the washers (2 sizes) from an online supplier.
Steve has the flipper rebuild kit for the flippers on the Zipper mech; the usual plungers, links, springs etc.
What play are you referring to regarding the Zipper?
When it closes, there should be just a small amount of travel where the nylon ramp catches the lever that keeps it closed. Another words, the ramp has a small amount of movement towards the large coil that pulls the Zipper closed and the edge of the locking lever (when it is closed).
There is tolerance in all the pieces. It was probably tighter when new and didn't have thousands of movements. The wings that hold the coils have some lash before they close. And the slide has a bit if lash too. Have the whole thing clean and operating smoothly is key.
Quoted from Mudflaps:Also, again, a huge thanks for everyone’s help working out the gremlins. Especially Skidave for letting me know one of my flippers had a diode installed backwards, likely causing many of my issues.
Happy to help! Plenty of members here helped me along the way. I'm enjoying your thread and glad that I could chip in some way.
You're currently viewing posts by Pinsider Skidave.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/medusa-playfield-swap?tu=Skidave and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.