I'm now working on rebuilding all the flippers. I got the rebuild kits for the upper and lower flippers,
but the EOS switch is a single, while the ones in the machine are double and different at that!

Those familiar with these older Bally flippers, do you have a source for the switches? I think I can get
one of them, part number A365-00046-0000 which I would use for the lower normally closed/normally open
But the upper flippers have normally closed on both.

I've attached pics of the rebuild EOS switch I got, and pictures of the upper flippers (dual normally closed)
and the lower (normally closed/normally open).

Thanks,
Doug

Lower Flipper EOS (resized).jpg

Upper Flipper EOS (resized).jpg

Switch From Rebuild Kit (resized).jpg

I was able to get help from Joseph 'Tony' Dziedzic and what he did to build switches
of his own. I ordered the following from Pinball Resource, and will use them, as well as
modify two, to work.

(2) DE-180-5018
(1) ASW-A20-36
(1) ASW-A20-37
(2) ASWA-10-45
(2) ASW-A20-34

Hopefully this will help someone else trying to run down these parts for a rebuild.

Doug.

Get your parts soon. Some are tough to find.
Pop bumper bases I got from New Zealand.
Kicker between the flippers I had to get from Canada.
The rest I was able to source locally.

Doug