Restoring a Medusa. All the incandescent seem to be too much heat etc.. I want to convert to LEDs. I have Alltek boards. Would like to get a LED kit or a list of suggested LEDS and where to get them. Thanks
Restoring a Medusa. All the incandescent seem to be too much heat etc.. I want to convert to LEDs. I have Alltek boards. Would like to get a LED kit or a list of suggested LEDS and where to get them. Thanks
IMO, I created the 6mm Warm White Retro at Comet for this purpose.
This will come closest to incandescent.
If you want a bit brighter, there is a 2 LED.
All other vendors, including Comet have 10mm single LED and look OK.
I would not recommend a 1 SMD...its too bright for the art.
If you have confusion, or focused needs, try some samples.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/medusa-convert-to-leds and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.