Premium UV kit
Thank you
You're currently viewing posts by Pinsider pinpickle.
Click here to go back to viewing the entire thread.
Quoted from Utesichiban:How did Hopper's truck get inside the building? Via the upside down?
Haha
Quoted from robotron911:Finally... #215 has it's name called. Can't wait to add it to my game!
Quoted from robotron911:Finally... #215 has it's name called. Can't wait to add it to my game!
Me too at #216. Can’t wait.
Question…
This plugs into CN6. I currently have speaker lights in CN6. I have the PCB 12v splitter. The glowing wall doesn’t light up when plugged into a the accessory board. Anyone have this issue? Any suggestions??
Electricity is a weak point for me but if someone has a solution that would be great.
IMG_9565 (resized).jpegIMG_9579 (resized).jpegQuoted from Medisinyl:This came up once before (perhaps others have the issue and aren't aware).
I initially sent a 2nd set to the same result, to discover there were several other mods on that port keeping the light dim (both sets were fine).
---
The gate side circuit has a 430 ohm resistor in the circuit to achieve the desired brightness/darkness and speed of the glowing effect when connected to a machine without other mods (didn't occur to me that a splitter and other mods would so greatly diminish the gate effect, but it's been something to learn from).
It's possible removing this resistor in the circuit would fix the issue for those with other mods attached there.
The wiring that is affixed with black hot glue in the back channel has separate wiring for the RGB and Gate.
The side that has a bulge is the gate side. After that bulge (the breathing effect), is the 430 ohm resistor (twisted together with a 20k ohm resistor for the RGB side [for those curious, the 20k resistor slows the RGB effect down as desired and reduces the colors to primarily red/green/yellow colors more suitable for the application]).
Well when I said electricity is my week point your talk of (20k resistor, 430 ohm) is way above my head. Any simple solution?
Quoted from DugFreez:If you would be interested in better speaker lights, I have my Deluxe and Deluxe 5.25" kits that do not use that CN6 connection and come with their own power transformer.
Doug (SpeakerLightKits.com)
I have used your lights in the past with no issue. I will grab a couple sets for this and my GOTG.
5.25 is what I need for the kenwood speakers?
You're currently viewing posts by Pinsider pinpickle.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/medisinyl-mods-stranger-things-no-list-until-fully-revealed?tu=pinpickle and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.