I can PM eventually once I have those small pieces ready to ship.

There were reasons I didn't make railings for the stair portions, though of course the railings were more of a free gift after reveal (by then, development time and expense was becoming too great after 5 months, but I wanted to have something there once I saw there was support for the set).

I worried about a railing at that point affecting the ball travel before getting to the balcony.

Perhaps the main concern was that the right ramp has the plastic shield, and if I wasn't going to do that side, I thought keeping the other stair railing bare better blended the two in-between.

Adding railings to that stair portion looks a bit jarring to me as well, as it makes them stick above the balcony railing (I'm likely over-sensitive ).

Then I would have also had to plan for 3D ball caps, which would have had their own challenges and undesirable obstructions.

At the time, I also hoped to have a clip-in only solution. Had I known hot glue would be necessary to keep them in place without something uglier holding them down, I would have had more freedom, but I ran out of time to invest in the project.

I appreciate the positive feedback and photo

As for being sought after, I do hope sellers do well when/if the time comes. It was reassuring to see several AMH sale ads disappear after reveal, getting replaced by want ads. AMH deserved a second look.

While it's preposterous for someone selling something to suggest it may be worth more, I imagine some can see the unanticipated reality of what has gone into creating this was largely considered a passion project rather than pricing it in. I didn't want to price people out of getting these in games, and know it can be hard to see the value in what may tangibly appear as plastic and lights.

If someone can get that difference or rarity value down the road, then that's a win/win. It will be interesting to see what a modded AMH goes for in 2022 if anyone sells. I believe they were right at $5k on reveal.

-----------------------------------------------

I have yet to see which opto you mean, but will look for the post later on.

I don't foresee ever selling mine either I expect most will be "bolted to the floor" as has been the case for modded RZ games.

----

Otherwise, I think I saw the "invested" in quotes from Tim's post above and wrongfully associated "sought" with a value increase My post may have been a tangent.

I'll need to take a similar pic once I move AMH near RZ and ACNC

Otherwise, if your Pussy Liquors sign isn't lighting, I can pay you the shipping cost to send it back for repair. While discontinued, I still cover those mods if they fail.

892771ea174dad89d94a61c3a5f67ebcce6439ce (resized).jpg

ed6128a03e08b2bb21b67e3b756b389f79818cad (resized).jpg

The photos look great, and your eye fix looks to be a perfect match.

Hard to tell if each game just has the art application a bit different, or if mine is the one wonky one. Funny as I reworked that panel a few times to get the eyes right on my game

What really mattered was that the bottom of the back panels would be pretty flush to the plastics once installed, and looks perfect on each game thus far (relief ).

Thank you for the photos.

Note: On my personal game, I printed the factory Hellevator guide panels in the same filament and stained them the same way, so it all looks like once piece when installed.

Unfortunately Ben's files for that aren't print and play--the track grooves need to be dremmeled out significantly to prevent binding (originals in my game were already reshaped), so the easiest thing would be to paint the original ones if someone wants them to match, though the area is obscured from player perspective.

Just now noticing your key box is installed on the wrong post, which is why the lettering is obscured on the left.

There's provision under the mod to cover the other nut.

Same issue with the key box mount point here as well. Perhaps I need to hand write a note in the instructions to be more clear.

EDIT: I see in the 2nd pic it was already fixed

Awesome

And yeah, the set was intended to be used with factory lighting, which was generally too dark in the back, but the flickering light in the center was to help that without losing the Spooky atmosphere

I'll send out messages for batch #2 later this week.

Sorry to disappoint, but the AMH list was already capped at 45 limited, numbered sets--full list here: https://pinside.com/pinball/forum/topic/medisinyl-mods-america-s-most-haunted-amh-limited-set/page/4#post-6468341

I'll add you to the overflow list, but so far everyone has remained in.

Overflow list:

1) Richiewrench
2) Ross
3) Straker
4) try2skyme
5) Azmodeus
6) kidchrisso
7) Jazman
8) atlgills

9) TG

I've updated the list.

But to be clear, only 45 sets will ever be made, so the overflow list is there in case anyone ahead backs out.

Batch #2 is 15 sets, but batch #1 wound up being 14 sets (partially completed 15 at the time). I also intended to hold off Spooky's set until the end, but a couple pieces in one set had some minor b-stock qualities I didn't want to send to a paid order, so there's still one from the first batch that needs to go out with batch #2.

And indeed, shipping to Australia right now may be an issue. I plan to be at TPF, and could deliver it that way if it makes more sense.

Wound up letting that one slip when making the instructions. This post should help:

https://pinside.com/pinball/forum/topic/medisinyl-mods-america-s-most-haunted-amh-limited-set/page/4#post-6494963

Should have batch #2 messages out by Sunday night.

Will send out messages within the next few hours or so.

Messages have been sent to those in the batch #2 group.

Tentative batch #2:

Magicchiz
17) Pinball_Freak
18) ddpinball
19) db666
20) wcbu64
21) Street
22) leaffan67
23) calprog
24) herg
25) tharm
26) P1nhead
27) Acejedi
28) 2Kaulitz
29) Mdanielb
31) Dendoc

Tentative batch #3:

32) joetechbob
33) Kolrath
34) ultimategameroom
36) AMSNL
37) adamross
38) Betelgeuse
39) doomid
40) carter008
41) loren3233
42) icyjones
43) Hooch333
44) dnapac
45) spandol
30) DakotaMike (requested to be at the end)
35) gottafixit (req. end)

Overflow list (just in case any back out from the main list):

1) Richiewrench
2) Ross
3) Straker
4) try2skyme
5) Azmodeus
6) kidchrisso
7) Jazman
8) atlgills
9) TG

overflow #10) spacemanrats09

Love the badger . Thank you for the photos

Looking like Wednesday, with a full run photo here by Tuesday night.

Most is complete. Need to decal and clear the elevators tomorrow, then finish the wiring on Tuesday.

These will indeed ship out tomorrow. Photo here later tonight.

Seems I'm not the only vampire up right now

The batch #2 pic:

20211117_125130 (resized).jpg

Got batch #2 shipped out earlier, and tracking numbers have been sent.

Thus far it sounds like everyone is staying in, but if anyone does back out, I'd ask Richiewrench if he'd want a gold AC vent and desk bell for #150 (as that's first on the overflow list).