I needed to remove the wire form to fix a pop bumper bug.

When I re-installed the wire form, I noticed it wouldn't stay put/centered with the metal ramp (see picture). Once it's off center, the ball can "trip" on the end of the left wire form (which interferes with it's journey across the wire form).

Unfortunately, this wire ramp doesn't have holes to insert the wire form (keeping them in place).

I've tried making various adjustments, but I'm falling flat on my face.

I imagine anyone whose worked on MB may have dealt with this issue...

THanks for any HELP!

IMG_1987.jpg

I can push it into place and it will stay for awhile, however it's popping out. Once it pops out, the ramp doesn't function as it should.

Would it be possible to post a picture of the hooks?

I just solved it by simply squeezing the metal hooks together to better grip/hold the wire form. When I removed the wire form, I probably nudged the hook on the metal ramp with I was removing the wireform (which caused it to widen and not hold the wire form properly).

Thanks guys!

Thanks! That's how mine looks now. Before, there was too much "play", which cause the wire form to move around.