Put new optos in Maverick when ball 1 is supposed to lock it shows ball locked on dmd but it drops the ball. In test mode the switches (double?) hit. Any help is appreciated
Put new optos in Maverick when ball 1 is supposed to lock it shows ball locked on dmd but it drops the ball. In test mode the switches (double?) hit. Any help is appreciated
Sounds like problem with optos inside the boat. Did you replace those? Might be out of alignment. You should try posting in Maverick fan thread for greater visibility.
Is the double hit caused by the ball rolling past the top Opto prior to tripping the bottom Opto? Check the switch matrix and make sure you don't have a row or column problem. I had an Opto problem some years ago & fixed it by swapping driver boards between Maverick & Baywatch. After the swap both games worked correctly. I think one of the Opto positions in the matrix was unused on Baywatch.
3 pairs so 6 total optos (3 emitters and 3 receivers). 1 pair at paddle wheel entrance. 2 pair in the Lauren Belle.
Quoted from crujones4life:3 pairs so 6 total optos (3 emitters and 3 receivers). 1 pair at paddle wheel entrance. 2 pair in the Lauren Belle.
I’m new to optos. What the the difference emitters and receivers...ball just sits on the wire form after the paddle wheel.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/maverick-optos?hl=otrchief and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.