Hi Guys, just picked up a Maverick.
I've got a lock issue, the first one in the list, is listed as bad in the diagnostic. I don't have the manual yet, can you indicate which one is the corresponding on the playfield ?
I have horizontal lines missing on the dot, sensitive to flex movement, i'm not sure it's fixable, any idea ?

I have already a pin2DMD and three P2.5 64x64. Can i use it directly ??(i can scavenge my pincab for now

Out of that, i just played it 5 minutes, so i'll subscribe here and read a bit more !!

Hi,

thanks all for your replies.
I managed to have both opto working during test and during play. The diverter blocking balls for lock is now also working properly.
But from time to time, one ball is release during play. I'm suspecting it's linked to opto overreacting to vibration, can it be possible ?
I've seen people putting switchs instead of opto, is it the best way to have a robust play ? any reference of the good one (think it was mention as stern switch) ?

Ok, i said "both" to refer to the boat's body one.
This issue is not easy then to track, as it's intermittent.
And i guess the machine doesn't give you a clue about why it's launching a new ball.. at least not mine.
i'll try to debug that.
Any advices are warmly welcome

I'am suspecting this one too, as it was banging on Diagnostic mode, even if i was just touching the wires..