Maverick
Data East, 1994Without stickers, my current plan is $50 + shipping (at cost or flat rate). I gotta sell a bunch to cover production costs, but don't want to price gouge people. Additional boats will be at a discounted rate, and shipping cost might not increase. They said I can expect the boats by end of December. I will open the Pinside storefront for ordering once I receive the boats.
Quoted from Prodigal1:Without stickers, my current plan is $50 + shipping (at cost or flat rate). I gotta sell a bunch to cover production costs, but don't want to price gouge people. Additional boats will be at a discounted rate, and shipping cost might not increase. They said I can expect the boats by end of December. I will open the Pinside storefront for ordering once I receive the boats.
This is great news for everyone ,keep up the great work bud your doing very well
I would be willing to bet that Marco or Pinball Life would buy your inventory that you don't sell immediately.
Happy New Year! The vinyl stickers arrived. They are very forgiving if you need to adjust placement. I cut them out with a razor knife and metal ruler, and used scissors for the boat nose. I should have used scissors for all brown shapes.The test boat had some sticker residue from a prior paper sticker test so the attached image may show other minor imperfections. I will post again when the boats arrive and a set of stickers is placed. They are slated to ship to me this week! Once I have everything in hand, I will open the Pinside Shop for orders. Thanks for hanging in there!
20230103_184534 (resized).jpgQuoted from Prodigal1:Happy New Year! The vinyl stickers arrived. They are very forgiving if you need to adjust placement. I cut them out with a razor knife and metal ruler, and used scissors for the boat nose. I should have used scissors for all brown shapes.The test boat had some sticker residue from a prior paper sticker test so the attached image may show other minor imperfections. I will post again when the boats arrive and a set of stickers is placed. They are slated to ship to me this week! Once I have everything in hand, I will open the Pinside Shop for orders. Thanks for hanging in there!
[quoted image]
Looking great so far bud way too go coming all together
Quoted from Prodigal1:VERY SOON!
[quoted image]
Wow this is great news for all Maverick owner ,Prodigal1 hit it out of the park with this new Boat and decals
The boats are available for sale in the Pinside Marketplace! $60 each with one set of Kiss-Cut stickers. $7 flat rate shipping to USA, or $30 flat-rate International. Sticker instructions (PDF): https://www.keepandshare.com/doc29/116235/maverick-stickers-install-pdf-3-0-meg?da=y
Thank you for all your patience and support!
I appreciate each and every one of you
that stuck with me through the design process and ordered. I have a feeling I will be upside-down on this for a few years, but it was totally worthwhile. I am stunned it was never available as an aftermarket item in almost 30 years. Please PM me if you run into any installation issues or have a whoops on a sticker. I forgot to mention the metal piece that holds the hex studs for the top of the boat has a curved vertical front that must go behind the windows (inside) on the front of the boat. Make sure it's stuffed in there before screwing the boat down. It"s a tight fit! Can't wait to see everyone's setup!
Judging by the tracking number, I will have pics of the boat in my pin by tomorrow or Friday at the latest!
Thank you for sticking your neck out there, spending your free time designing this and getting these to market for us!
The stickers are far better quality that the ones from Marco! They could stand just a little heat to stretch into place in some spots. But I was in a hurry and it still looks awesome!!
The boat is a perfect fit! Thank you so much!!
34658807-688D-4147-85D8-EFA0F58C456A (resized).jpegB929E3E8-99BF-4521-98F2-37CA0E621D61 (resized).jpegE96B3B26-6397-4768-8196-0BD28564BBD3 (resized).jpegF1C47E80-683F-4DFB-8271-E73A04146912 (resized).jpeg
Quoted from Prodigal1:Looks great! You didn't waste any time getting them dressed up and installed!
Nope! Maverick is the most played table in my shop, everyone loves it! So I had to get it topped up quickly. I am planning to eventually add smoke stacks and lighting.
This boat was done right and looks great! A lot of time and effort was put into this project and is worth every penny for a Maverick owner who needs a new boat or a spare.
Hi all I got my new boat with stickers today and installed looks so good with my restored Maverick it was the last thing I needed thanks too Prodigal1 great job
10663E30-0984-48F6-868E-8500137E17C0 (resized).jpeg4C1DDE30-F891-4645-B270-C76694AFE00E (resized).jpeg91AA6780-4AD5-48F5-8B51-B31057DFD006 (resized).jpegE2C12B6B-56E8-43E0-9E6C-C6FF34F5EA6F (resized).jpegQuoted from Prodigal1:Excellent work William! Loving these fresh looking Mavericks!!
Thank you for the kind words I did a full restore inside and out on my Maverick and this boat and sticker really makes it 100% now thanks so much again great job u did on the new boats
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/maverick-boat-lauren-belle/page/3?hl=aflacjack and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Hoover, AL
Collingwood, ON