Blue and white to tint it. Possibly needs yellow. If it needs to be desaturated add a very small amount of red or orange.
What paint are you using? Createx has some blues in that range.
You're currently viewing posts by Pinsider dr_nybble.
Click here to go back to viewing the entire thread.
Blue and white to tint it. Possibly needs yellow. If it needs to be desaturated add a very small amount of red or orange.
What paint are you using? Createx has some blues in that range.
Most places will sell opaque red inserts. You have to sand them to get rid of the mold mark and also potentially to make it fit (or clean out the hole). Then you have to apply a decal (or paint via using a paint mask, or rub-on transfer) and clear coat it.
Alternatively, try a red LED under the old insert. You'll be surprised how much better it suddenly looks!
Quoted from Bill_EM:I have the exact same playfield repairs that you just did. How did you get your lettering so perfect? Thanks
Looks like a waterslide decal (you can see the decal outline if you look closely).
You're currently viewing posts by Pinsider dr_nybble.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/matching-a-colour-on-the-payfield-quick-draw?tu=dr_nybble and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.