I'm looking for blank connectors that would plug into this. It's the connector in the front of the WPC coin door that carries the full 120v white and black wires. I ordered some 9 pin IDC parts from marco that looked similar but they're not a match. Anyone know where to get exact matches for this to make something that plugs into it?
Is is the 9-pin on this page?
http://www.greatplainselectronics.com/Category-90.asp
Quoted from Erik:Is is the 9-pin on this page?
http://www.greatplainselectronics.com/Category-90.asp
No, the male part is slightly different. The link you posted has a few pins slightly rounded and won't fit into his female connector.
LTG 
Quoted from markmon:I'm looking for blank connectors that would plug into this. It's the connector in the front of the WPC coin door that carries the full 120v white and black wires. I ordered some 9 pin IDC parts from marco that looked similar but they're not a match. Anyone know where to get exact matches for this to make something that plugs into it?
Keep an eye on Ebay for cheap Mars bill validators and grab the male plugs off of them.
Or check with Mars, or Suzzo Happ.
LTG
I think you want a Molex Mini-Fit p/n 15-31-1092. Digi-Key has them, Digi-Key p/n WM2591-ND. The crimp pin you'll need is female (I believe) Digi-Key p/n WM23232CT-ND. If you don't have a universal crimper, and most don't, you can bend the crimp tabs over with pliers and solder the wires to make a permanent connection. I would confirm this for sure but I'm not home so can't get near a machine to check.
Quoted from thompso9:I think you want a Molex Mini-Fit p/n 15-31-1092. Digi-Key has them, Digi-Key p/n WM2591-ND. The crimp pin you'll need is female (I believe) Digi-Key p/n WM23232CT-ND. If you don't have a universal crimper, and most don't, you can bend the crimp tabs over with pliers and solder the wires to make a permanent connection. I would confirm this for sure but I'm not home so can't get near a machine to check.
Thank you. These are cheap enough that I'll just order a few and test.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/match-for-this-wpc-connector and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Hillsboro, OR