Silverball Mania
Bally, 1980You're currently viewing posts by Pinsider packie1.
Click here to go back to viewing the entire thread.
Vid
I have a question.
So I ordered the 20ga mirror finish stainless from masters. It measures .030. I then measured the thickness of the guide on a Data East Secret Service and it is .048. I assume the ,030 wont work for this guide. So depending on the game or manufacturer, some difference can be expected. Right?
Mike
Quoted from vid1900:The easiest way is to just take the broken wireform up to the hardware store or welding shop and match it up.
Grab a handful of rod, the stuff is so cheap.
The stainless welding rod is already pretty nicely finished, but you can use some Green compound if you want it mirror.
I've seen 3 different size wire guides, and I'm sure there are more in the world.
I am referring to sheet metal guides not rod wire. I just wanted to see if .030 would work for .048 on this game. Also wanted to inform others that there might be different thickness out there.
Quoted from vid1900:Is it a structural part, or just guide to a chute?
Got a pic?
Here is the left side guide. Same material as the right side I am working with.
Mike
20180821_172558 (resized).jpgYou're currently viewing posts by Pinsider packie1.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/making-new-ball-guides-from-scratch-vids-guide?tu=packie1 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Kewanee, IL