Revenge From Mars
Bally, 1999You're currently viewing posts by Pinsider dieseldogpi.
Click here to go back to viewing the entire thread.
Quoted from Imeh:Where did you get the cherry DA3 switches that are complete?
http://www.marcospecialties.com/pinball-parts/5647-12693-19
Quoted from wizzardz:Had to get a new switch for the front of the CPU box
You don't need to get a new switch, you can use the original one. Follow the instructions on the site nosro linked.
Quoted from wizzardz:The original in mine was soldered and was more trouble than worth to clean up (the switch in the instructions don't look like they were soldered). I could likely have even done without one, but I had a switch laying around and the machine had to go thru other troubleshooting where the switch came in handy.
Oh OK. I just didn't want people to think you had to. The original switch will work. You just have to cut the green wire from the ATX PSU, solder it to one tab of the switch, then solder another wire to the other tab and ground that to the case.
You're currently viewing posts by Pinsider dieseldogpi.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/making-a-rfm-bulletproof?tu=dieseldogpi and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Mount Sinai, NY