(Topic ID: 298691)

Making a Nice Addams Nicer Kruzman PF Swap and Bulletproofing

By dmacy

70 days ago


Topic Heartbeat

Topic Stats

  • 44 posts
  • 7 Pinsiders participating
  • Latest reply 42 minutes ago by dmacy
  • Topic is favorited by 13 Pinsiders

You

Linked Games

Topic Gallery

View topic image gallery

B78BF186-E2EB-41D7-9012-8890C2CE0FB5 (resized).jpeg (© Nutty 5.0)
73BD7859-9180-4171-9DCD-BB34C3098856 (resized).jpeg (© Nutty 5.0)
FB0B4A58-3AFF-41DE-B9B4-BA93A23C65C0 (resized).jpeg (© Nutty 5.0)
6147C355-8392-4516-B23E-E797867C8D33 (resized).jpeg (© Nutty 5.0)
93C4414D-F096-49EE-9952-6F38EFBF8708 (resized).jpeg (© Nutty 5.0)
5B081902-C188-4CBA-8932-7B84CA80B745 (resized).jpeg (© Nutty 5.0)
0CCA6AAD-79D1-48C7-8003-99BE708A99E3 (resized).jpeg (© Nutty 5.0)
378A04E8-525C-4D32-A0F1-50D4DB4C802D (resized).jpeg (© Nutty 5.0)
810BDDE8-0A79-4E86-9EDD-F1D57808675E (resized).jpeg (© Nutty 5.0)
B8F68C1A-8FED-4BE4-A8E9-A2DA89B774C6 (resized).jpeg (© Nutty 5.0)
2FD5AD6D-166C-4FE0-AB83-23624CCB50FB (resized).jpeg (© Nutty 5.0)
1E6AB11C-D895-4C07-BE5A-26079B370488 (resized).jpeg (© Nutty 5.0)
C55ED98E-CA6A-4FF7-9704-F21E10127E28 (resized).jpeg (© Nutty 5.0)
EBB41651-47C8-4757-AF00-2D329A4D5C23 (resized).jpeg (© Nutty 5.0)
2FA1103C-22D5-4368-9B82-0721D59BFEEE (resized).jpeg (© Nutty 5.0)
1F8078FA-659B-4BB7-AC80-B4CFB5C5E2C3 (resized).jpeg (© Nutty 5.0)

#1 70 days ago

Documenting this really nice The Addams Family refresh. We will be installing a short list of new parts including a new ramp, Titan rubbers, plastic protectors, book case decal, backbox decal, and a few LEDS where they need tweaked. We will be tweaking the pop bumpers with some different colored bodies and skirts.

This refresh will mostly focus on long term bulletproofing to make it last problem free for a long time as it already is very nice. Top side will get stripped to polish, clean, ultrasonic and regrain. We will fix anything wrong or found broken. Rebuilding of all mechs and flipper assemblies and rebuilding the shooter.

Any mods will get soldered directly and the boards are getting sent out to be checked and have NVRAM installed.

We’re also looking to add some spot lights if anyone has some good examples and where they’ve placed them.

98B196BE-48EC-4D36-B035-5F4B1D055D7A (resized).jpeg1767E9D9-2424-4219-B317-067772583397 (resized).jpeg632DB28A-B214-4419-9DDC-4533020D5930 (resized).jpegB4D492DD-2E52-45A0-98F5-04C73DA97686 (resized).jpeg0BF80BF7-6235-4C50-B245-99BB06392DE8 (resized).jpeg446A1E0B-C922-4C8D-8839-D65BBA985F25 (resized).jpegCAE57E51-214C-4F55-85CB-3BDD353B3CBA (resized).jpeg54AFC305-4DCF-4F07-B885-D166E29E94CD (resized).jpegDEAD3080-ADF3-46BF-8C4A-9DAE4F38F0AC (resized).jpeg37B5FECA-F3A0-4DA2-AA7E-881DA1F1514C (resized).jpegDAE33C67-4C64-464F-BB31-936E4078F0D9 (resized).jpeg

#2 70 days ago

Tear down has begun. The usual pics to remind me to where these go at where they mount on the angle brackets of rotisserie.

66C2E2AE-7104-40B4-BC2E-F8C283AF3E1A (resized).jpeg3F2D20AF-A75B-40E8-AC0D-E598E6A69DA3 (resized).jpeg4354D385-D545-487F-AA05-0B2040642D52 (resized).jpegE668AB9D-7B26-40AF-906B-1495D5E0478B (resized).jpegF24F5E9A-D611-4AFA-A4D8-837B2F391D71 (resized).jpegBB3D3B24-B08C-4176-AC13-F2C3DFCDC45E (resized).jpeg
#3 70 days ago

Pretty normal stuff. Many parts are recent. Plastics all look good.

The green led in the swamp will get a better option than taped in the corner.

The ball gate for trough was a custom made version. Will get the correct wire gate.

065C7B56-5FCC-4DE1-8104-E526AC11E7DE (resized).jpeg29D5D3C8-0844-44C4-958D-E3358CAE6E55 (resized).jpeg1C9A3865-7DA6-4359-B2C4-8A87ABFFF8AB (resized).jpeg226C67BD-EF65-4922-9EDB-3FEE9A2A93AF (resized).jpegF4D7E7AB-C1B1-46BE-B464-F323B086FBF7 (resized).jpegF36231DD-4647-495D-86D1-5C9499E6B270 (resized).jpeg2F8CAE1D-3C60-4D35-9399-E11F9463A2E5 (resized).jpeg3EB84F0F-E3B4-4031-A7AD-E57FBDC7FC1D (resized).jpeg2CA8452F-0C06-4D90-BEFB-DF75F1370945 (resized).jpegE227EC09-99D3-42C5-848F-9A7500BB5023 (resized).jpeg
#4 70 days ago

Those Canadian screws sneak into every other game I swear!

Top side is mostly stripped. Just some posts or parts that need removed from the bottom.

Decals for bookcase and back wood panel shown.

8C2B0B1E-0AA0-45CD-86F2-6B7BD8C7A374 (resized).jpeg55A9E779-4351-4D94-849B-A8CE844D9535 (resized).jpeg03E5E75E-E762-42F8-B2E2-C5286724D36C (resized).jpeg2C3FD046-241F-4FB6-993C-C15F1231EC4C (resized).jpeg3E17C596-9FCD-4FB6-BFDB-30C61712AC70 (resized).jpeg94FF48F9-A817-4389-817C-05C3458C5636 (resized).jpegE8FF2E6A-72EB-4370-9C7D-3583BD2C593E (resized).jpeg
#5 70 days ago

The tops is stripped. I’m thinking we should get new targets. At least one for the swap with the reinforced DE style.

The bottom side is packed!

222149BD-36DD-4329-AD5E-15F3DC2553E7 (resized).jpeg418382CE-3424-4413-AC7E-34D5F1CE96E8 (resized).jpeg
#6 69 days ago

The supervisor has approved the tear down and progress.

The boards are headed to Rob Anthony at GEX to be gone through.

AC5167A8-B667-471A-9823-A7E550387BC3 (resized).jpegE07F09BE-8C15-401D-8748-15B5CB916C72 (resized).jpeg9D01A8B1-5BB4-425C-BDD4-30E70CE5B849 (resized).jpeg
#7 69 days ago
Quoted from dmacy:

The supervisor has approved the tear down and progress.
The boards are headed to Rob Anthony at GEX to be gone through.
[quoted image][quoted image][quoted image]

GEX? Who is rob?

#8 69 days ago
Quoted from mollyspub:

GEX? Who is rob?
//<![CDATA[
window.__mirage2 = {petok:"e6fce48def36514202f70b9b4a5d428d71f32ef6-1629105228-1800"};
//]]>

http://lockwhenlit.com/

https://www.replaymag.com/game-exchange-of-colorado-adds-rob-anthony-to-team/

#9 68 days ago

For the pop bumpers, we are going to go with Zitt clear bodies and bases and color match skirts with caps. Should brighten it up and still look original. I love the clear bodies he has. Both the true clear and frosted clear. They both have their place depending on the title.

Here’s some examples with what I have in stock.

58C64B45-14FD-4D5F-B15D-8A17A90A26C5 (resized).jpegD46366BB-054F-4E51-B810-6D11D9B9E0C8 (resized).jpeg
#10 68 days ago

Here’s the paper clip one way gate. It was well done but will get the correct one.

Bookcase coming apart.

971E217E-72AE-48E7-87A6-273A6D5942BB (resized).jpegF747670C-2F46-4283-BAAF-3490EE9AEC51 (resized).jpeg394AE75B-9FEF-40DA-AF68-0C0819C6611B (resized).jpeg8A319115-B720-4619-8570-D7A60E365C95 (resized).jpeg90815945-0612-4126-A469-0DE3D0DAEDEB (resized).jpegDC7F4F6D-4D0E-4324-9151-F0D22F6729D6 (resized).jpeg6314E73B-2B73-4EBE-AE16-C9FAFC9A6310 (resized).jpeg67F99C08-37AE-433C-9FC4-174000F2400C (resized).jpeg
#11 67 days ago

Mechs are disassembled and cleaned. Flipper bases will get new as they are pretty ugly.

4DB0EE79-27E5-48C1-806C-0A6419468889 (resized).jpeg5979B311-8E39-4B7D-9732-AACCEF018841 (resized).jpeg7092E881-B972-48C6-ABB4-455B1843189C (resized).jpeg776D7B20-C50D-4DF0-ABAC-05EAEC66EF43 (resized).jpeg87864454-AF2B-49B6-89F8-5EB39EC4C649 (resized).jpegE086E5CC-0EF6-46D7-8C26-E71AE59078AC (resized).jpegF5DFDA02-14DE-4CFF-A707-3CD862EF472F (resized).jpegF8341FEC-DA60-4452-88FC-21234B13B24B (resized).jpegF9BF9F8F-2F45-4636-B036-9FB3A569FEAB (resized).jpeg

1 week later
#12 58 days ago

Apologies for being away so here’s Karolina guarding underneath the playfield to make up for it.

FB1C4EDC-F089-4798-ACA9-E1041DEA0C72 (resized).jpeg
#13 58 days ago
Quoted from dmacy:

For the pop bumpers, we are going to go with Zitt clear bodies and bases and color match skirts with caps. Should brighten it up and still look original. I love the clear bodies he has. Both the true clear and frosted clear. They both have their place depending on the title.
Here’s some examples with what I have in stock.
[quoted image][quoted image]

What are your plans for the scoop hole?
Looks pretty rough .

#14 58 days ago
Quoted from mollyspub:

What are your plans for the scoop hole?
Looks pretty rough .

It has a Cliffy that covered it. It will go back on once I polish the playfield and Mylar.

#15 57 days ago
Quoted from dmacy:

Here’s the paper clip one way gate. It was well done but will get the correct one.

In a pinch you can use the metal wire handles from a chinese takeout container - the wire holds up a lot better than a paper clip (which tends to break at any bends out time.)

This is of course if you are either cheap or <b> don't have the correct piano wire on hand. I usually just bend all my own missing gates if I don't already have one from a scrapper playfield.

#16 57 days ago

Yep good call! I have piano wire in a few thicknesses. Everyone that works on pinballs should have some.

#17 57 days ago

I didn’t take notice when I did some quick games but I saw it when I lifted the playfield. Must’ve really acted weird in game play. Note the wrong plunger has a plastic washer that was binding.

I rebuilt these with new parts. The other plunger was a bit chewed up. Usually they’re ready to be replaced if original.

257F8C58-4474-44F1-B736-EE2D97228D88 (resized).jpeg90D5F2EB-E520-4D98-93D6-82192AE33BE3 (resized).jpegDF27D55B-88FA-4A35-A527-61147048D833 (resized).jpegF7431D55-0614-4AED-822E-44689D894E6F (resized).jpeg7740B233-03AD-4C6F-BA6E-64C23AE0F4E2 (resized).jpegC1DE2ADC-B7F1-437F-9A42-B3826CF5E64A (resized).jpeg
#18 57 days ago

All the parts ordered are here now so there’s no breaks Karolina!

I ordered the Pinball Life target supports for these two areas that get beat up. I ended up getting three new orange targets as they were a really ugly and dull orange.

Note the extra support up front and the “L” bracket on the rear of the supports. You will need to drill out the rivets but I feel these areas need the support.

27D94190-B216-48A8-8EE2-3828C4C2633E (resized).jpegDC034C36-39E8-4FC8-9A18-F75781FFD4A7 (resized).jpeg9CD39AB5-8C15-4BAB-A58D-C9BC06275622 (resized).jpeg7B4454C2-2F10-4B64-8BE1-C75D0D03AB82 (resized).jpeg6E31BE12-D926-4549-85FE-FDEA19975452 (resized).jpegF65350C6-29CE-46E1-AA85-09742A29C28F (resized).jpeg97E09C57-72CB-4D57-A302-4FDD4C49439E (resized).jpeg7B387906-2D93-4FF0-977D-ED7A98F1C9C6 (resized).jpeg501CA4C3-D6A7-400C-9D41-24D08143BAF1 (resized).jpeg
#19 57 days ago

I was going to polish the Mylar areas but they weren’t coming up nice enough. I ended up pulling the two areas of Mylar. One at the pops and by the chair, and one at the swamp kick out.

They came up great and look much better now. I still have to polish the entire playfield.

6C305C20-A1B6-4A3C-AE43-369727C9050A (resized).jpeg9DE121EC-82E9-49F6-8D56-5FE7B9466017 (resized).jpegAA02D8F4-41B3-401F-A102-CCFDDB6BC344 (resized).jpeg4166E265-563B-4591-B74A-7181AA25CE13 (resized).jpeg65318F92-42CC-475D-A5E6-54506D6C6BEA (resized).jpeg6446C424-6671-4927-8DE6-72A3FF9F8DB1 (resized).jpeg
#20 56 days ago

Playfield polishing is completed. Added some Mylar at wear areas and ball drops including the ball trough drop. I still need to add some that looks clean for the Cousin It mansion window.

Ball guides are regrained and installed.

The pop bumper setup using clear bodies with colored skirts that will match the caps.

1B2EB5FD-23FA-4560-90EC-CD18ED633B95 (resized).jpeg93441A50-7F48-44EE-A723-D84F599F9FDA (resized).jpeg57C527E1-37F0-4781-86DA-6F19347DC9AF (resized).jpeg68AB3ACC-12DE-466B-BF08-7A6D5B58DFC3 (resized).jpeg
#21 56 days ago

Decals are installed. I go wet using Rapid Tac. Someone here turned me onto it and wouldn’t have it any other way. Everyone has their own way. Spit on it or go dry. Dry has always been a disaster for me.

Playfield starting to come back together. I’m going to add a few lighted star posts in a few areas. Not sure where yet but for certain the slings. Blue or purple using clear star posts?

A3A36227-E2AC-4DBC-B340-6137B937D11F (resized).jpegAB76FB0A-2C13-4684-A8A7-4D2125C50D72 (resized).jpeg28B64A54-7BE0-41BB-B843-5C2E885FB9E7 (resized).jpeg299986BF-DF78-4279-8FD5-B7579BC86360 (resized).jpegE6CD7E3B-5319-444D-9606-4D14BF70E292 (resized).jpegCD426DB8-9799-415C-A74D-3752AC7A197F (resized).jpeg
#22 56 days ago
Quoted from dmacy:

Decals are installed. I go wet using Rapid Tac. Someone here turned me onto it and wouldn’t have it any other way. Everyone has their own way. Spit on it or go dry. Dry has always been a disaster for me.
Playfield starting to come back together. I’m going to add a few lighted star posts in a few areas. Not sure where yet but for certain the slings. Blue or purple using clear star posts?
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]

Can you elaborate on the use of rapid tac ?
I've been using windex for a bit now.

#23 56 days ago
Quoted from mollyspub:

Can you elaborate on the use of rapid tac ?
I've been using windex for a bit now.

Sure, and I’ve used that and than dish soap mixed with water. Rapid Tac allows more working time and helps with air bubbles. It is also used as the cleaner prep before install. It’s only down size is it’s price.

This gives a better description:
RapidTac Vinyl Wrap Application Fluid 32 Ounces Spray Bottle Including Yeti Microfiber Towels amazon.com link »

#24 56 days ago

I may be posting less playfield updates and focus on the mechs, ramps, cabinet and other odds and ends for a while. Looks like this may be getting a kruzman playfield. I can attest to his work on my own IPB TAF he had done (was part of a deal when I got my TAF) for someone. I was lucky enough to install it around 2013 and it’s had a lot of play and held up great.

#25 55 days ago

Slings rebuilt and new labels.

67CB1EBC-B7C9-49C9-B26C-E5F9CC787FF4 (resized).jpegB4AB7E3C-0C84-4565-BEB0-CA938D88F582 (resized).jpeg
#26 55 days ago
Quoted from dmacy:

I may be posting less playfield updates and focus on the mechs, ramps, cabinet and other odds and ends for a while. Looks like this may be getting a kruzman playfield. I can attest to his work on my own IPB TAF he had done (was part of a deal when I got my TAF) for someone. I was lucky enough to install it around 2013 and it’s had a lot of play and held up great.

Nothing wrong with that! I don't even care for this game but I'm following because of your work .Oh and I like your cat !

#27 54 days ago

It is official; the thread title needs changed to include a RK playfield swap with a new CPR gone over by kruzman

The old playfield will be for sale along with the Cliffy's. It won't be able to be sold until sometime in October.

#28 53 days ago

Bookcase has been rebuilt with new parts. The switch harness is drying and it will get new switches and a new decal.

07C02A46-609D-46C1-B033-2715D3EB9E0F (resized).jpeg3A309519-5404-457F-8E3B-75474B50D43E (resized).jpeg
#29 53 days ago
Quoted from mollyspub:

Nothing wrong with that! I don't even care for this game but I'm following because of your work .Oh and I like your cat !

Work is great, fantastic narration...but make no mistake, the cat is the real star of this show...

#30 53 days ago
Quoted from dmacy:

Sure, and I’ve used that and than dish soap mixed with water. Rapid Tac allows more working time and helps with air bubbles. It is also used as the cleaner prep before install. It’s only down size is it’s price.
This gives a better description:
RapidTac Vinyl Wrap Application Fluid 32 Ounces Spray Bottle Including Yeti Microfiber Towels amazon.com link »

I need to try this, I use the "dry" method and its a little frightning...

#31 52 days ago

While the playfield is still a few weeks out, there’s plenty of work that is getting done.

New switches on some ramps, bookcase finished with new switches, and the swamp accelerator installed.

Started tear down of the old ramp.

31339616-A8D5-4803-BE3A-84E9A4CE823D (resized).jpegE6C496AA-B2DE-4998-9A41-29F21FEDA153 (resized).jpeg9235D683-41B7-49A6-8747-ECBD4493EEFC (resized).jpeg2A6B213E-3D8C-46DE-853A-62E19EAAC53F (resized).jpegCF738958-AB69-48FC-90C4-104626C2F30C (resized).jpeg3AA9F410-709F-4715-BE5A-23A878E5F2FD (resized).jpeg
#32 51 days ago
Quoted from dmacy:

I may be posting less playfield updates and focus on the mechs, ramps, cabinet and other odds and ends for a while. Looks like this may be getting a kruzman playfield. I can attest to his work on my own IPB TAF he had done (was part of a deal when I got my TAF) for someone. I was lucky enough to install it around 2013 and it’s had a lot of play and held up great.

I came to this thread solely because of the Ronald Kruzman PF in the title. Good luck with the build.

1 week later
#33 44 days ago

Swapped out the old “clear” tubing with some new.

New ramp is slowing coming together.

607C12EF-1BFA-438A-8A7F-47FF0D67096E (resized).jpeg0240F921-D986-4768-AEFE-B66F3F1B3C73 (resized).jpegAD210241-EA4C-4A8C-B5CF-33A5F01D34A8 (resized).jpeg
#34 42 days ago

Ramp is done other than the one switch cover. Going to get a new one. Also added in the rear switch bracket ball trap too.

210ADB09-8361-4FCD-BDAE-E0251924E96E (resized).jpeg2673B48C-401D-4054-8B65-D0DBFEB5AD54 (resized).jpeg
#35 41 days ago

How in the shit did I miss this thread?

Anyway, it's about to get shiny up in here!

#36 39 days ago

Titan rings have arrived. I have the colors set with the exception of the sling rings. They will get either a blue or purple lighted star post using a clear star post. But I do have a red, blue and purple star posts too.

For rings, it is either clear, blue or purple. Hope to get some testing soon with different posts lights and rings for opinions.

For now, here’s the rest of the ring color setup but may switch to a few red double star posts.

4F7F6F66-CB3A-4DEB-AAFE-0815DBF8B959 (resized).jpegABE341E0-E8DB-4054-8E49-54AA1864E7C0 (resized).jpegC2D0F041-33FF-4448-9F20-00FC58DB3AB6 (resized).jpegB0A6A483-AB8F-45F1-B75A-519E783DCCBB (resized).jpegED47C640-C1A2-4A3B-8FDE-C0101139686B (resized).jpegA645A651-55BD-4966-B192-5A9AE1A1792C (resized).jpeg828DA974-1064-4FCE-8DF8-7FDC7AC9C729 (resized).jpeg
#37 38 days ago
Quoted from dmacy:

Titan rings have arrived. I have the colors set with the exception of the sling rings. They will get either a blue or purple lighted star post using a clear star post. But I do have a red, blue and purple star posts too.
For rings, it is either clear, blue or purple. Hope to get some testing soon with different posts lights and rings for opinions.
For now, here’s the rest of the ring color setup but may switch to a few red double star posts.
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]

I just have to say....I've never cared for different colored rubbers on a game. It reminds me of color puking a game with different color GI lamps.

This area of the playfield is red, so let's use a red ring. This over here is blue, so let's use blue. It's too much. Makes your playfield look like a rainbow. I don't want my playfield to look like a rainbow.

I find it's better to pick a color that looks good and compliments the general colors on the playfield. That includes the post rubbers too.

Rings and posts can be different colors but make rings the same and posts the same.

Just a thought.

#38 38 days ago

Thanks Bryan! I agree on some of your comments. However the game owner is ultimately who gets to choose.

#39 34 days ago

New flipper bases look much better than what came out. They’re getting all new flipper bushings as one was so loose it was a miracle it didn’t drag the playfield. They look new but don’t trust them.

Modified the lighted flipper buttons to use the coin door interface rather than running the wiring all the way up to the 12v. Seems redundant.

New lockdown receiver from Kerry with new Titan decal.

4417FE30-0C4E-4FA6-882B-13ED0461A4B8 (resized).jpeg74405775-CA8D-4260-883A-F7D074B74888 (resized).jpegB156CC9F-D084-454E-ABB6-441105F2F8EF (resized).jpeg

#40 32 days ago

The knocker cleaned up and rebuilt.

Center ramp flap needs replaced. Getting ready to put on new one from Mantis.

Supervisor hard at work…

5D65A7DC-CAA6-4DED-856E-48D47E6611FC (resized).jpegE709A871-5935-411B-BD1F-2CEFC4268EB8 (resized).jpegBF27E37B-57AE-436D-AD3A-2C926E67162A (resized).jpeg319C89CD-818A-4DD0-9605-DE777A735EE1 (resized).jpeg1EB20615-994A-432A-A94B-12D7E4F322C1 (resized).jpeg1F8078FA-659B-4BB7-AC80-B4CFB5C5E2C3 (resized).jpeg
#41 32 days ago

Here’s the lighted star post lights. One is purple and one is blue. Pictures really aren’t a good indicator. They all look similar to me but the clear rings would make better use of the lights. Think the purple light with clears will give the best look.

2FA1103C-22D5-4368-9B82-0721D59BFEEE (resized).jpegEBB41651-47C8-4757-AF00-2D329A4D5C23 (resized).jpegC55ED98E-CA6A-4FF7-9704-F21E10127E28 (resized).jpeg1E6AB11C-D895-4C07-BE5A-26079B370488 (resized).jpeg2FD5AD6D-166C-4FE0-AB83-23624CCB50FB (resized).jpegB8F68C1A-8FED-4BE4-A8E9-A2DA89B774C6 (resized).jpeg

#42 30 days ago

The tilt bob parts are back in after ultrasonic and tumbling.

Rebuilt knocker is back in place.

378A04E8-525C-4D32-A0F1-50D4DB4C802D (resized).jpeg810BDDE8-0A79-4E86-9EDD-F1D57808675E (resized).jpeg
3 weeks later
#43 8 days ago

Rob at GEX sent the boards back now with a clear bill of health so we’re still moving forward. Installed with new ribbon cables.

The plastics and playfield (with Cliffy’s) will be for sale if anyone needs a good and not broken/bent/damaged set.

0CCA6AAD-79D1-48C7-8003-99BE708A99E3 (resized).jpeg

1 week later
#44 42 minutes ago

The playfield is in route. Apparently it hasn’t left Michigan completely or didn’t get to the next depot.

While I wait, I’m prepping some of the plastics that need rivets drilled or multi-level plastics assembled.

You can see the clears aren’t horrible but they have yellowed.

Plastic protectors will be used.

B78BF186-E2EB-41D7-9012-8890C2CE0FB5 (resized).jpeg5B081902-C188-4CBA-8932-7B84CA80B745 (resized).jpegFB0B4A58-3AFF-41DE-B9B4-BA93A23C65C0 (resized).jpeg6147C355-8392-4516-B23E-E797867C8D33 (resized).jpeg73BD7859-9180-4171-9DCD-BB34C3098856 (resized).jpeg93C4414D-F096-49EE-9952-6F38EFBF8708 (resized).jpeg

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside