Got an email from Dominick today that my order was shipped. I sent him an inquiry yesterday referencing my order number and reiterating I don't need him to assemble and I think that helped. Pics to follow!!!!
Got an email from Dominick today that my order was shipped. I sent him an inquiry yesterday referencing my order number and reiterating I don't need him to assemble and I think that helped. Pics to follow!!!!
Quoted from bimm25i:Got an email from Dominick today that my order was shipped. I sent him an inquiry yesterday referencing my order number and reiterating I don't need him to assemble and I think that helped. Pics to follow!!!!
Still Hasn't arrived....
If it makes you feel any better, I ordered from him March 5th and haven't gotten anything and he hasn't replied to my PM yet.
Quoted from bimm25i:Got an email from Dominick today that my order was shipped. I sent him an inquiry yesterday referencing my order number and reiterating I don't need him to assemble and I think that helped. Pics to follow!!!!
So either my package has been "shipping" for 60+ days, or I was told it was shipped just to shut me up. I know which one I want to be true, but at the same time I know which one is probably true.
Very disappointing experience so far with germangamingsupplies ordered over 120 days ago...
I did get an email asking me to review my products on his website, I am not going to because "something something not nice to say....something something nothing at all"
On the flipside, I placed an order with Cliffy B in January, he sent me an email telling me he was months behind and asking if I was ok waiting, I said go for it. Cliffy emailed me when they did ship, apologized for the wait, and go figure they were in my mailbox a few days later.
A tale of 2 orders, my thanks go to cliffy only at this point.
Quoted from bimm25i:So either my package has been "shipping" for 60+ days, or I was told it was shipped just to shut me up. I know which one I want to be true, but at the same time I know which one is probably true.
Very disappointing experience so far with germangamingsupplies ordered over 120 days ago...
I did get an email asking me to review my products on his website, I am not going to because "something something not nice to say....something something nothing at all"
On the flipside, I placed an order with Cliffy B in January, he sent me an email telling me he was months behind and asking if I was ok waiting, I said go for it. Cliffy emailed me when they did ship, apologized for the wait, and go figure they were in my mailbox a few days later.
A tale of 2 orders, my thanks go to cliffy only at this point.
Thanks for the update.
I just got finished building and installing my display and I'm glad I did. Malenko the coloring you did looks fantastic. After owning this machine for almost 12 years the color display brings it new life. I'd also like to say thanks to lucky1 and all the other people who have put in countless hours of hard work designing and coding pin2dmd.
Still wish some one would sell plug and play pin2dmd for Sf2. I dont have time to dick with it, I just want to plug it in and gooooo.
Still waiting to get my hardware from GermanGaming (no progress other than a bogus tracking number). However, thanks to u/latenight04 I now have a pin2dmd for my machine and it seems to be working great . Donation sent over to Malenko - thank you so much for all your hard work!
20181102_120107 (resized).jpgQuoted from Hvyarms:Still waiting to get my hardware from GermanGaming (no progress other than a bogus tracking number). However, thanks to u/latenight04 I now have a pin2dmd for my machine and it seems to be working great . Donation sent over to Malenko - thank you so much for all your hard work!
[quoted image]
It's 'only' been 7 and a half months for you. One guy on pinside recently waited 8 months. Others have waited longer to get what they ordered or to be reimbursed ...
I'd suggest kicking up a bigger stink here and informing robin , since rappelbox still has a store on Pinside. Maybe you'll then get product or a refund.
You guys are gonna make me go out and buy another SFII pin. I too am waiting a LONG LONG time for an order from GGS.
Quoted from Malenko:You guys are gonna make me go out and buy another SFII pin. I too am waiting a LONG LONG time for an order from GGS.
Hehe, its a good value game!
I contacted robin like you are suggesting rubberducks. Not sure if it will help or not but I figured it was worth a try. Next step would be to contact the Facebook mods for the germangamingsupplies page there as well.
Hi All - just a quick update for the thread. I had a series of back and forth conversations with Dominik from GermanGamingSupplies and Robin. Ultimately Robin was my hero and with enough pushing I received my package today from GGS (so it is possible)! To the rest of you who ordered I hope you are able to get your packages eventually as well
Hvy
Quoted from cait001:now someone please make a mod and install a ball autolaunch
lol, right? That would take software update too. I think a total game re-design at that point would be due. Could be epic!
Autolaunch would be doable, just have to have a launch mech like TMNT so you could still use the plunger. Or replace the rod with a button. The button would just trigger a relay that fires the solenoid, wouldn't need a software update could totally be done via hardware.
I wouldn't mind having a broken SFII to try and remake with a P3ROC/PROC ; its actually a pretty great layout its the stop and go play that most people dislike.
Quoted from Malenko:Autolaunch would be doable, just have to have a launch mech like TMNT so you could still use the plunger. Or replace the rod with a button. The button would just trigger a relay that fires the solenoid, wouldn't need a software update could totally be done via hardware.
I wouldn't mind having a broken SFII to try and remake with a P3ROC/PROC ; its actually a pretty great layout its the stop and go play that most people dislike.
I think theyre more interested in the multiballs automatically happening instead of having to load the other balls via plunger before it starts.
ahhhhh gotcha. Tapping a launch button would be a step in the right direction but having it autofire like that would definitely need a software update.
Ive been reading up on the PROC stuff, if I did redo SFII I'd remake the original game, and do SFIITurbo (?) and you'd pick which one to play when you coin
p :p I've got a myriad of ideas and modes on paper using the existing layout , even have a couple video modes working in my head.
I wonder if you could smooth over the blanka kick out and the vega hole and make a loopable shot around that orbit. You could just use optos to beat blanka and vega instead. Would make it a lot less clunky, and would serve the auto launcher better. The balls could launch in and come down that left orbit instead of clunk clunk clunk lol.
would there be a way to without a full code redo to make the switch in the shooter lane trigger the new auto plunger to launch the ball?
Quoted from InfiniteLives:would there be a way to without a full code redo to make the switch in the shooter lane trigger the new auto plunger to launch the ball?
How would that work with the skill shot?
Quoted from Chitownpinball:How would that work with the skill shot?
oh, well yeah forgot about that. skill shot is pointless anyways if you are trying to get a good score when you can collect multiple super jackpots for 300 mil or beat the champions challenge for 500 mil. gotta break 2 billion to get last on my scoreboard lol
Quoted from InfiniteLives:oh, well yeah forgot about that. skill shot is pointless anyways if you are trying to get a good score when you can collect multiple super jackpots for 300 mil or beat the champions challenge for 500 mil. gotta break 2 billion to get last on my scoreboard lol
If were changing the code, wouldnt we change this too? Lol. Its all about making the game better as a whole.
Quoted from Chitownpinball:If were changing the code, wouldnt we change this too? Lol. Its all about making the game better as a whole.
Your retort was to my suggestion at adding an auto plunger without a change to software //shrug
Quoted from InfiniteLives:Your retort was to my suggestion at adding an auto plunger without a change to software //shrug
Lol sorry.
I think a rewrite is definitely in order. SF2Turbo would be an epic mod.
Install autoplunger on the shooter lane, have dual ball play more seemless and regular to overcome stop/go.
Have car-bash a regular mode that plays while the upper playfield is still active.
Redo the skill shot values
Less flipper choices to speed up gameplay, and less pauses in holes in general (have animation run while game is going)
Quoted from cait001:I think a rewrite is definitely in order. SF2Turbo would be an epic mod.
Install autoplunger on the shooter lane, have dual ball play more seemless and regular to overcome stop/go.
Have car-bash a regular mode that plays while the upper playfield is still active.
Redo the skill shot values
Less flipper choices to speed up gameplay, and less pauses in holes in general (have animation run while game is going)
Ive been thinking hard about what could change to make the game better. I actually want to adjust the playfield a bit.
Remove blanka hole
Move the vega hole down into the lane between the vega hole and the pop bumper. Make this the skill shot, kind of like FH.
This will open up the orbit to be able to orbit either lane. Make the blank and vega hole optos instead.
Make the bracelet the jackpot shot on a mode. the center of the target is 2x the jackpot
More to come....
I'd still like to pick up a dead SFII so I could do a custom P3-ROC on it or something.
I've already done the DMD, Translight, cab art, and even some play field stickers ; the only thing left to do is a software rewrite
Quoted from Chitownpinball:Remove blanka hole
so just have a standup back there and have it come back quickly? Might need some kind of guide to prevent bounce-offs and keep it to the wall.
a rewrite definitely needs more Chun Li and Guile shots IMHO
Quoted from cait001:so just have a standup back there and have it come back quickly? Might need some kind of guide to prevent bounce-offs and keep it to the wall.
a rewrite definitely needs more Chun Li and Guile shots IMHO
Nah, just have an opto there to register the shot. Right?
Maybe an up post if you want to set that shot up for a combo or something. Kind of like iron maiden does for the loop jackpot shot
Guile is my favorite and the toughest shot to make. Its tight!
another thing you could do in software alone: Have certain switch hits pulse the rotating Chun Li flipper so you advance it to a better position
I just finished building and testing a pin2dmd display if anyone is looking for one. Send me a pm if you are interested.
Finally, pin2dmd received, copied Malenkos files over to the sd card, and meanwhile waiting for the unlock key, i tested the display. I selcted gottlieb v2, left other options default.
It looks slightly off when it comes to colors, and animations, i took some videos in the links below. Can someone confirm if this is how it should look?
https://drive.google.com/file/d/1gHq6EW2C484DVtF_tjqDmghfBSQaXqDq/view?usp=drivesdk
https://drive.google.com/file/d/1OdOZhkRkqOxXd1Jl3udFryJsF8Gm75ps/view?usp=drivesdk
Or will something be improved when the display is unlocked?
Morten
Quoted from Edenecho:Or will something be improved when the display is unlocked?
Morten
Colorizations only work with activated firmware. Sent you the key 2 hours ago via PM !
Quoted from lucky1:Colorizations only work with activated firmware. Sent you the key 2 hours ago via PM !
Yup thanks, transferring it at home now, was just curious if activation was needed for colors, and not full colours until trial version time ended =) good to hear! Will fix it tomorrow!
Quoted from ImNotNorm:Ok....a few things I've noticed.
1- Vera's claw seems to be regularly colorized now.
2- My multi-ball and torpedo mode are colorized white on the DMD.....but when I get a jackpot....it sometimes turn to red and then stays that way. (50/50 chance of that it seems)
3- When I killed Guile and Blanka, their old animations played with the crappy grey coloring. (Only happened once, then it reverted to the Malenko colorized animations.......which are gorgeous by the way)
Just wondering if I'm the only one experiencing some of these issues....or if others are as well?
Or maybe I did something wrong during the install?
I finally got mine up and running, and I am experiencing some of the same issues. (even though you fixed it by re-plugging connectors ?)
- Intermittently Blanka is grey old animation, and sometimes in between there are some white/grey frames in general.
- Often when starting multiball everything is in grey, then after a jackpot it flashes red and usually stays red for the rest of the multiball. Way it should be?
- In the info screen for guilde, the green and red colors seems to be very intermittent for when they are showing correct and not.
- At boot, the Pin2DMD first is in color, then it turns to grey, with Gottlieb V2 in text beneath, as another pinsider in this thread experienced. I shall try some replugging first.
Any idea what the culprit might be? Besides that, the new animations are fantastic
sf2 guile instrution1 (resized).jpgsf2_guile_instru2 (resized).jpgsf2_multiball red (resized).jpg
Quoted from Edenecho:- Intermittently Blanka is grey old animation, and sometimes in between there are some white/grey frames in general.
Missing keyframe
Quoted from Edenecho:- Often when starting multiball everything is in grey, then after a jackpot it flashes red and usually stays red for the rest of the multiball. Way it should be?
Missing keyframe
Quoted from Edenecho:- In the info screen for guilde, the green and red colors seems to be very intermittent for when they are showing correct and not.
Missing keyframe
Quoted from Edenecho:- At boot, the Pin2DMD first is in color, then it turns to grey, with Gottlieb V2 in text beneath, as another pinsider in this thread experienced. I shall try some replugging first.
That´s a normal process. Bootsplash is displayed with VGA palette after that the default palette of the project is active.
So the pin2DMD version was .58, I updated to the newest firmware version .65. That eliminated many of the missing frames. a couple remain:
1. In multiball everything the color is grey, and when scoring a jackpot, all turns red.
2. Some blanka/ car crush progression frames are grey.
Quoted from Edenecho:So the pin2DMD version was .58, I updated to the newest firmware version .65. That eliminated many of the missing frames. a couple remain:
1. In multiball everything the color is grey, and when scoring a jackpot, all turns red.
2. Some blanka/ car crush progression frames are grey.
Either you fix them yourself with the pin2dmd editor or you kindly ask Malenko if he helps you.
Quoted from lucky1:Either you fix them yourself with the pin2dmd editor or you kindly ask Malenko if he helps you.
Sorry if it sounds that way, i am just for curiousity posting an update as to the progress status
Im extremely thankful for effort done on this.
My questions has been more regarding what is "as is" and what might have been some challenges not with color files.
Sorry I sounded harsh.
I refactored almost the complete code from 2.58 to > 2.60 . Maybe that fixed some issues accidentially
Excited to discover this thread. Then read the last few pages and it seems like there were some issues that make me hesitate. So questions:
1) Did everyone receive their shipment? Has shipping from GGS improved lately? Updated link for the correct product?
2) Has Malenko addressed the problems some users have had? How often do these issues occur?
3) Is there step-by-step instructions for assembling and installing this anywhere? Total noob here.
Thanks!
Every once in a while Vega's recolor wont trigger, same with Blanka's. The old scene plays instead of the redraw. Nothing game breaking, just ugly =) I've added a *lot* of triggers but it still happens on occasion. After I added the additional triggers, I never had any issues. Unfortunately I dont have my actual SF2 pin anymore so any further testing would need to be done on a vpin.
You can always order from dpannell if you want to buy from someone in the US. I have nothing to do with the hardware or supplying it; Im not affiliated with GGS, Lucky1 or Dpannell.
Just installed my display and encountered some interesting behavior:
1) First time I ever plugged it in, it worked great. Sagat's animation only ran once, but he turned white on the final frame.
2) The next day, and ever since then, the Gottlieb and Premier logo are now all white, and Sagat's animation runs twice, but this time he doesn't turn white. Other animations look fine.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/make-street-fighter-ii-great-again/page/11?hl=lucky1 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.