I would reseat the socketed chips. Sounds like chip creep to me. Also reseat the ribbion cables. VERY common to have an issue there.
You're currently viewing posts by Pinsider hawk007.
Click here to go back to viewing the entire thread.
I would reseat the socketed chips. Sounds like chip creep to me. Also reseat the ribbion cables. VERY common to have an issue there.
How old is the power supply? I have seen them go bad . Also reseat the connectors and see if does it then. Very common to replace the power supply and not redo all the connectors.
Could be as simple as a power supply pin solder [on main board if ps new], to a bad molex or pin/s or even hardware. But given the game i suspect headers or pins etc. Especially with the new power supply assuming it is good. You can always meter the supply on power up and see if it falls off while booting the first time....just a thought....
You're currently viewing posts by Pinsider hawk007.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/lw3-cpu-woes?tu=hawk007 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.